206 Каталог KYOCERA 2016 Фрезы со сменными режущими пластинами для металлообработки Стр.H12

Каталог KYOCERA 2016 Инструмент фрезерный с СРП по металлу Стр. H12 0206 ENG Lab2u

SLOT MILLS MSTB SLOT MILL (UP-RIGHT) Recommended Cutting Conditions Workpiece Material Hardness (HRC) Recommended Insert Grade (Vc: sfm) fz (ipt) Notes PVD Coated Carbide Insert Thickness PR0725 0.138" 0.157" 3.50mm 4.00mm 0.177" 0.236" 4.50mm 6.00mm Low Carbon Steel 1010 1025 20 560 690 0.003 0.008 0.004 0.009 Dry Carbon Steel 1030 1059, 1060 Annealed 29 330 460 0.003 0.008 0.004 0.009 1030 1059, 1060 Heat Treated 37 300 390 0.003 0.008 0.004 0.009 Alloy Steel Annealed 28 300 390 0.003 0.008 0.004 0.009 Heat Treated 41 260 360 0.002 0.007 0.003 0.008 High Carbon Alloy D2, H13, etc. 41 230 300 0.002 0.007 0.003 0.008 Stainless Steel 304, 316, etc. Austenitic 33 360 460 0.002 0.007 0.003 0.008 Coolant 403, 410, etc. Martensitic 45 330 390 0.002 0.007 0.003 0.008 Heat-resistant Alloys Inconel 718, etc. 37.7 50 100 0.002 0.007 0.003 0.008 Titanium Alloys Ti-6Al-4V, etc. 40 70 160 0.002 0.007 0.003 0.008 Gray Cast Iron N0.45 N0.60 38 360 430 0.003 0.009 0.004 0.010 Dry Nodular Cast Iron 60-40-18 70-50-05 25 260 330 0.003 0.009 0.004 0.010 80-60-03 120-90-02 37 230 300 0.003 0.009 0.004 0.010 H12 Kyocera