102 Каталог KYOCERA 2016 Фрезы со сменными режущими пластинами для металлообработки Стр.E18

Каталог KYOCERA 2016 Инструмент фрезерный с СРП по металлу Стр. E18 0102 ENG Lab2u

90° LEAD MEC I When using inserts with corner-R(rc)1.6 or larger, additional modifications of the cutter body will be necessary. Ref. to the chart below for the recommended modifications. R shape is recommended for additional processing to the body corner. When applying chamfer shaped additional processing, do not cut away too much. Insert Corner-R(rs) Additional Modifications of the Cutter Body Corner 1.6 R1.0 2.0 2.4 R1.2 3.1 R1.6 4.0 R2.5 Body corner Additionally processed Insert with \ large corner-R(rs) Pre-processing Post-processing Recommended Cutting Conditions JT Chipbreaker Workpiece Material Feed Rate fz (ipt) Recommended Insert Grade Vc (sfm) Toolholder Description Cermet MEGACOAT NANO MEGACOAT PVD Coated Carbide CVD Coated Carbide MEC0500 MEC0750 MEC10 MEC19 MEC1000 MEC1500 MEC20 MEC40 MEC1500R MEC4000R MEC040R MEC160R TN100M PR1535 PR1225 PR1210 PR830 CA6535 Carbon Steel 0.002 0.004 0.006 0.003 0.006 0.010 390 520 660 390 590 820 390 590 820 390 520 660 - Alloy Steel 0.002 0.004 0.005 0.003 0.006 0.008 330 460 590 330 520 720 330 520 720 330 460 590 - Mold Steel 0.002 0.003 0.004 0.003 0.005 0.008 260 390 490 260 460 590 260 460 590 260 390 490 - Austenitic Stainless Steel 0.002 0.003 0.004 0.003 0.005 0.006 330 520 660 330 520 660 330 460 590 - Martensitic Stainless Steel 0.002 0.003 0.004 0.003 0.005 0.008 490 660 820 590 790 980 Precipitation Hardened Stainless Steel 0.002 0.003 0.004 0.003 0.005 0.008 300 390 490 - Gray Cast Iron 0.002 0.004 0.006 0.003 0.007 0.010 390 590 820 - Nodular Cast Iron 0.002 0.003 0.004 0.003 0.006 0.008 330 490 660 - Ni-base Heat Resistant Alloy 0.002 0.003 0.004 0.003 0.005 0.006 70 100 160 70 100 160 Titanium Alloys 0.002 0.003 0.004 0.003 0.006 0.008 130 200 260 100 160 230 - X Bold numbers in the graph indicate the most recommended value of feed (fz) Adjust cutting speed and feed rate according to the actual machining conditions :1st Recommendation Machining with coolant is recommended for Ni-base heat resistant alloy and titanium alloys 2nd Recommendation E18 Kyocera