65 Каталог KYOCERA 2016 Фрезы со сменными режущими пластинами для металлообработки Стр.C13

Каталог KYOCERA 2016 Инструмент фрезерный с СРП по металлу Стр. C13 0065 ENG Lab2u

MFK Recommended Cutting Conditions (Coated Carbide) Workpiece Material Insert Grades Cutting Speed Vc sfm) Chipbreaker fe (ipt) 0.0024 0.0039 0.0079 0.0118 0.0157 Cast Iron CA420M 560 750 980 GM 0.0098 PR1510 390 590 820 GH 0 0118 PR1525 GL 0.0047 Nodular Cast Iron CA420M 490 660 820 GM 0. 0079 PR1510 330 490 660 GH d 38 PR1525 GL 0. 0039 1 st Recommendation it: 2nd Recommendation Recommended Cutting Conditions (Ceramic) Without Chipbreaker Workpiece Material Insert Grades Cutting Speed Vc (sfm) Edge Prep. fe (ipt) 0.0020 0.0039 0.0079 0.0118 0.0157 Cast Iron KS6050 CS7050-& 1970 2950 3940 0.004 x 20° 0 0039 Nodular Cast Iron KS6050-& CS7050 1310 1970 2950 With Chipbreaker Workpiece Material Insert Grades Cutting Speed Vc (sfm) Edge Prep. fe (ipt) 0.0020 0.0039 0.0079 0.0118 0.0157 Cast Iron KS6050 CS7050-& 1970 2950 3940 0.002 X 15° 0 0039 Nodular Cast Iron KS6050-& CS7050 1310 1970 2950 1st Recommendation it: 2nd Recommendation Recommended Application Range Gray Cast Iron Nodular Cast Iron Gray Cast Iron / Nodular Cast Iron (Insert Grades Coated Carbide) (Insert Grades Coated Carbide) (Insert Grades Ceramic) Note, when using wiper insert 1. When using W type, please use together with GM or GH. 2. If machining over fz - 0.0079", insert corner will be damaged. The main cutting edge of W type insert is receding from that of GM and GH. Therefore, the feed rate for the insert next to W type is double of the other inserts. Kyocera C13 GRADES LINEUP/INSERTS 45°/70°LEAD 75° LEAD 90° LEAD HIGH FEED MULTI-FUNCTION SLOTMILLS RADIUS/BALL-NOSE OTHER APPUCATIONS TOOLHOLDING SPAREPARTS TECHNICAL INDEX