891 Каталог KORLOY 2020 Инструмент и оснастка для станков по металлу Стр.F15

Каталог KORLOY 2020 Инструмент для станков по металлу Стр. F15 0891 Lab2u

Technical Information for V Endmill O Recommended cutting conditions Shouldering Diameter (0D) Alloy & Carbon steel, HrC25 or less (SM, SCM) Mold steel, HrC35 45 (STS, KP4M) R.P.M (min-1) Feed (mm/min) ap (mm) ae (mm) R.P.M (min-1) Feed (mm/min) ap (mm) ae (mm) 2.5 15,915 1,241 3.8 0.7 12.732 891 0.3 0.3 3.0 13,263 1,241 4.5 0.8 10,610 891 0.3 0.3 3.5 11,368 1,241 5.3 0.9 9,095 891 0.4 0.4 4.0 9,947 1,241 6.0 1.1 7,958 891 0.4 0.4 5.0 7,958 1,241 7.5 1.4 6,366 891 0.5 0.5 6.0 6,631 1,241 9.0 1.6 5,305 891 0.6 0.6 7.0 5,684 1,241 10.5 1.9 4,547 891 0.7 0.7 8.0 4,974 1,194 12.0 2.2 3,979 891 0.8 0.8 9.0 4,421 1,194 13.5 2.4 3,537 891 0.9 0.9 10.0 3,979 1,194 15.0 2.7 3,183 891 1.0 1.0 12.0 3,316 1,194 18.0 3.2 2,653 891 1.2 1.2 14.0 2,842 1,194 21.0 3.8 2,274 891 1.4 1.4 16.0 2,487 1,194 24.0 4.3 1,989 891 1.6 1.6 Cutting condition by overhang 1. Standard overhang: Follow cutting condition above 2. Long overhang: When the overhang is increased by 10 mm, decrease feed 5% & ae 5% Slotting Application tip 0D jap Cutting condition by overhang 1. Standard overhang: Follow cutting condition above 2. Long overhang: When the overhang is increased by 10 mm, decrease feed 5% & ae 5% Endmill 15