1431 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.M31

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. M31 1431 Lab2u

Kennametal Technical Information KM-LOC Clamping System KM-LOC Clamping Units (continued) The KM-LOC Under normal use, the KM-LOC unit is designed to last 50,000 cycles. The KM-LOC units are greased at the factory during assembly. To keep the unit functioning properly, it should be periodically greased and, if operating under normal conditions, done regularly every six months. How to Grease the KM-LOC Remove the M6 sealing screw from the front face of the lockrod and thread the grease fitting into the tapped hole. A grease fitting is in the spare parts package included with every KM-LOC clamping unit. Approximate grease amounts are as follows: KM32 0.2-0.3 fl. oz KM40 0.3-0.4 fl. oz. KM50 0.5-0.6 fl .oz. KM63 0.5-0.6 fl. oz. Kennametal uses and recommends GLEITMO 805, a white, high-performance grease paste. lubricant order number size GLEITMO 805 grease 1567575 500g cartridge GLEITMO 805 grease 1567577 1000g tin KM-LOC Mounting Wedges Tightening Torque catalog number wedge screw hex size ft. lbs. Nm KM32CLSR/L2050K 4mm 10-14 14-18 KM32CLSR/L1250B 4mm 10-14 14-18 KM32CLSR/L1250C 4mm 10-14 14-18 KM32CLSR/L1650C 4mm 10-14 14-18 NOTE: Use a hex bit socket. Kennametal M31 Technical Information