1126 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.G16

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. G16 1126 Lab2u

DV40 Shank Tools DV40 Shank Tools TG Single-Angle Collet Chucks Kennametal Collet Capacity mm inch TG collet series min max min max TG100 2,6 25,5 5/64 1 ERICKSON' TG Round-DV Form B/AD order number catalog number collet series D11 L1 L9 V locknut wrench Nm stop screw wrench size stop screw kg 1237204 DV40BTG100080M DV40 60 80 70 8 LNA100M HSW58M 203 SS081041G 4mm & 5/32 1,38 NOTE: Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque. Collet chuck technical section, see page M98. Supplied with locknut and stop screw. Locknut wrench must be ordered separately. Interchangeable locknuts, coolant-style locknuts, and coolant disks are available and must be ordered separately; see pages L16-L17. Stop screw coolant caps are available and must be ordered separately; see pages L34-L35. Balanceable/interchangeable locknuts are available and must be ordered separately; see page L16. TG standard straight-bore collets, see page J10. TG tap collets, see page J10. For retention knobs, see page L45. G16 Kennametal