1574 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. 1574 Lab2u

Metalcutting Safety IMPORTANT SAFETY INSTRUCTIONS Read before using the tools in this catalog Projectile and Fragmentation Hazards: Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may fly off the workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse. To avoid injury: Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby. Always make sure all machine guards are in place. Breathing and Skin Contact Hazards: Grinding carbide or other advanced cutting tool materials produces dust or mist containing metallic particles. Breathing this dust or mist especially over an extended period can cause temporary or permanent lung disease or make existing medical conditions worse. Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse. To avoid injury: Always wear breathing protection and safety goggles when grinding. Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding. Avoid skin contact with dust or mist. For more information, read the applicable Material Safety Data Sheet provided by Kennametal and consult General Industry Safety and Health Regulations, Part 1910, Title 29 of the Code of Federal Regulations. These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The technical information included in this catalog and recommendations on machining practices may not apply to your particular operation. For more information, consult Kennametal’s Metalcutting Safety booklet, available free from Kennametal at 724.539.5747 or fax 724.539.5439. For specific product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at 724.539.5066 or fax 724.539.5372. Kennametal, the stylized K, A2, A3, A4, Beyond, Beyond BLAST, DFS, Dodeka, Dodeka MAX, Drill Fix, Erickson, Extrude Hone, GOdrill, GOmill, Green Box, HARVI, HARVI II, K715, KC7512, KC7542, KCNO5, Kenclamp, Kendex, KenFeed, Kenlever, Kenloc, Kenna Precision, KM, KM Micro, KM Mini, KM-LOC, KM-LOC-II, KM-TS, KM12, KM16, KM20, KM25, KM32, KM32TS, KM40, KM40TS, KM4X, KM50, KM50TS, KM63, KM63XMZ, KM80, KM80ATC, KM80TS, KSEM, KSEM PLUS, KSRM, KSSM, Maximet, Mill 1, ModBORE, Rodeka, Romicron, SEFAS, ToolBOSS, TopGroove, Top Notch, TopThread, UT63, Wedgelock, and Whistle Notch are trademarks of Kennametal, Inc. and are used as such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal’s trademark or other intellectual property rights concerning that name or logo. Daewoo is a registered trademark of Daewoo International Corporation. Densimet is a trademark of Plansee Se Corporation Austria. Gedore is a trademark of Gedore-Werkzeugfabrik Otto Dowidat. Giddings & Lewis is a trademark of Giddings & Lewis Machine Tools, LLC. GLEITMO is a trademark of Fuchs Lubritech GmbH. Hanes TAGLESS is a registered trademark of HBI Branded Apparel Limited, Inc. Hardinge is a trademark of Hardinge Brothers, INC. Hazet is a registered trademark of Hazet-Werk Hermann Zerver GmbH & Co. INCONEL is a registered trademark of Special Metals Corporation. Mazak and INTEGREX are registered trademarks of Yamatomo Kosan Kabushiki Kaisha Corporation. Mori Seiki is a registered trademark of Mori Seiki Co., Ltd. Nakamura-Tome is a trademark of Nakamura-Tome Precision Industry Co., Ltd. OKUMA is a registered trademark of OKUMA Corporation. QR Code is a registered trademark of Denso Wave Incorporated. SAFE-XOCK is a trademark of Haimer GmbH. Takisawa is a registered trademark of Takisawa Machine Tool Co., Ltd. Titleist DT SoLo is a registered trademark of Acushnet Company Corporation. Viton is a registered trademark of DuPont Performance Elastomers LLC. WD-40 is a trademark of WD-40 Manufacturing Company Corporation. Weldon is a registered trademark of Weldon Tool Company. Copyright 2013 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.