499 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.495

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 495 0499 ENG Lab2u

PENTACUT THREADING LINE PENTA 24-MT Precision Ground Pentagonal External Threading Inserts with a 60° Partial Profile Dimensions Designation Pmin Pmax R IC908 PENTA 24-MT-0.05 0.50 1.75 0.05 PENTA 24A-MT-0.05 (1) 0.50 1.75 0.05 Pmax=0.175xD (1) Flat rake (without a chipformer) For tools, see pages: PCADR/L (268) PCADR/L-JHP (268) PCHBR/L (269) PCHPR/L (268) PCHR/L-24 (265) PCHR/L-24-JHP (266) ISCARTHnEAD SWISSCUT INNOVAL LINE SCIR/L-22-MTR/MTL Threading Inserts with a 60° Partial Profile > Left-hand shown Dimensions Designation R Y Pmin Pmax TPI max TPI min o 0 IC SCIL 22-MTL003 0.03 0.4 0.30 0.90 83 28 SCIR 22-MTR003 0.03 0.4 0.30 0.90 83 28 SCIL 22-MTR/L007 0.07 0.5 0.70 1.10 36 23 SCIR 22-MTR/L007 0.07 0.5 0.70 1.10 36 23 SCIL 22-MTL010 0.10 0.8 0.90 1.70 28 15 SCIR 22-MTR010 0.10 0.8 0.90 1.70 28 15 For detailed cutting data, see pages 536-546 For tools, see pages: SCHR/L-BF (306) SCHR/L-BF-JHP (306) ISCARTHi CUTGniP TIP-MT Precision Ground Double-Ended Threading Inserts with a 60° Partial Profile and Chipformer ±0'025 0 7 TIP _MT Dimensions Tough Hard Designation W R±0.03 Pmin TPI max 8 0 IC IC908 TIP 2A-MT-0.05 (1) 2.40 0.05 0.45 56 TIP 2MT-0.05 2.40 0.05 0.45 56 TIP 2MT-0.14 2.40 0.14 1.11 23 TIP 4A-MT-0.15 (1) 4.00 0.15 1.25 20 TIP 4MT-0.15 4.00 0.15 1.25 20 TIP 4MT-0.20 4.00 0.20 1.63 16 TIP 5MT-0.25 5.50 0.25 1.94 13 (a) TIP inserts are 1.6 mm longer than GIP in the same pocket Toolholder seat needs to be modified according to insert profile to ensure clearance (1) Without chipformer (flat rake) For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) Member IMC Group kSSII t 495 THREADING