473 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.469

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 469 0473 ENG Lab2u

fsuacE USER GUIDE Face Grooving and Turning Recommendations Using Adapters for 3 mm Inserts Recommended feed range for grooving with Grip 3... and HGPL 3... inserts and HGAIR/L and HGAER/L adapters. Feed range changes according to adapter type. mm/rev 0.08 0.07 0.06 0.05 0.04 0.03 0.02 40-60 40-60 40-80 HGAIR/L 12-3T6 HGAER/L 12-3T6 HGAIR/L 14-3T7 HGAER/L 14-3T7 HGAIR/L 17-3T8 HGAER/L 17-3T8 HGAIR/L 21-3T9 HGAER/L 21-3T9 HGAIR/L 25-3T9 40-80 40-80 m/min Cutting Speed Vc Recommended depth of cut and feed range for turning with HGPL 3... inserts with HGAIR/L and HGAER/L adapters. Feed range changes according to adapter type. mm 1.2 3- 1.0 CC 0.8 o 0.6 e Q 0.4 0.2 0.04 0.05 0.06 0.07 0.08 0.09 0.1 0.11 0.12 mm/rev HGAIR/L 21-3T9 Feed HGAER/L 21-3T9 HGAIR/L 25-3T9 HGAIR/L 14-3T7 HGAER/L 14-3T7 HGAIR/L 17-3T8 HGAER/L 17-3T8 HGAIR/L 12-3T6 HGAER/L 12-3T6 Note: In roughing, increase feed at small depth of cut, and reduce feed at large depth of cut. Face Grooving and Turning Recommendations Using Adapters for 4-6 mm Inserts Recommended feed range in grooving with HFPR/L inserts and HFAIR/L HFAER/L adapters. T 6 mm Width of Inserts (W) Recommended depth of cut and feed range in turning with HFPR/L inserts and HFAIR/L HFAER/L adapters. Feed range changes according to adapter type. p e Q mm 2.5 2.0 1.5 1.0 0.5 0.05 HFAIR/L- 4 HFAER/L- 4 HFAIR/L- 5 HFAER/L- 5 HFAIR/L- 6 HFAER/L- 6 0.1 0.15 0.2 0.25 mm/rev Feed Note: In roughing, reduce feed when depth of cut is increased, ad increase feed at small depth of cut. Member IMC Group kSSII t 4 5 FACE GROOVING