463 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.459

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 459 0463 ENG Lab2u

459 PENTACUT PCHPR/L Perpendicular Holders Carrying Inserts with 5 Cutting Edges for Facing, Grooving, Parting and Recessing Designation h b W min W max f F1 l1 l2 h4 Tmax-a(1) PCHPR/L 16-24 16.0 16.0 0.50 3.20 (2) 1.5 (3) 23.5 120.00 11.5 - 6.50 SR 16-212-01397 T-20/5 PCHPR/L 20-24 20.0 20.0 0.50 3.20 (2) 1.5 (3) 28.0 120.00 11.5 - 6.50 SR 16-212-01397 T-20/5 PCHPR/L 25-24 25.0 25.0 0.50 3.20 (2) 1.5 (3) 33.0 135.00 11.5 - 6.50 SR 16-212-01397 T-20/5 PCHPR/L 20-34 20.0 20.0 1.40 4.00 1.9 34.0 120.00 15.0 6.0 10.00 SR 16-212-01397 T-20/5 PCHPR/L 25-34 25.0 25.0 1.40 4.00 1.9 34.0 135.00 15.0 - 10.00 SR 16-212-01397 T-20/5 (1) For specific information, refer to insert data. (2) Up to 6.2 mm width may be ordered on request. (3) Valid for inserts with W<3.2 mm For inserts, see pages: PENTA 24-BSPT (275) PENTA 24-ISO (274) PENTA 24-MT (276) PENTA 24-NPT (511) PENTA 24-UN (275) PENTA 24-W (275) PENTA 24-WT (276) PENTA 24N-C (271) PENTA 24N-C (full radius) (272) PENTA 24N-J (270) PENTA 24N-J (full radius) (271) PENTA 24N-PF/P (272) PENTA 24N-Z (273) PENTA 24R-C (410) PENTA 24R-P (412) PENTA 24R/L-J (409) PENTA 24R/L-Z (411) PENTA 34F-R/L (458) PENTA 34N-C (277) PENTA 34N-J (278) PENTA 34N-PB (276) PENTA 34R/L-C (413) PENTA 34R/L-J (414) PENTA 34R/L-PB (414) PENTACUT PENTA 34F-RS/LS Pentagonal Inserts for Face Grooving and Recessing Along Shafts up to 5 mm Depth of Cut at a Minimum of 22 mm Diameter For cutting speed recommendations, see pages 460-470 For tools, see pages: PCHPRS/LS (459) Dimensions IC908 Recommended Machining Data f face-groove (mm/rev) Designation W R Tmax-a D1 min PENTA 34F239-0.15-22R/LS 2.39 0.15 5.00 22.0 0.08-0.12 PENTA 34F247-0.20-22R/LS 2.47 0.20 5.00 22.0 0.08-0.12 PENTA 34F300-0.40-22R/LS 3.00 0.40 5.00 22.0 0.08-0.15 PENTA 34F400-0.40-22R/LS 4.00 0.40 5.00 22.0 0.08-0.15 PENTACUT PCHPRS/LS Perpendicular Shank Tools Carrying Pentagonal Inserts for Machining Next to Long Central Shafts Designation PCHPR/LS 20-34 PCHPR/LS 25-34 _h _b W min _W max l1 h4 Tmax- aM) 200 200 239 4.00 120.00 60 5.00 SR 16-212-01397RS T-20/5 25.0 25.0 2.39 4.00 135.00 - 5.00 SR 16-212-01397RS T-20/5 (1) Insert limit For inserts, see pages: PENTA 34F-RS/LS (459) FACE GROOVING