408 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.404

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 404 0408 ENG Lab2u

PARTING CUTGniP GIM-W-RA/LA Single-Sided Screw-Clamped Inserts with Central Ridged Chipformer for Parting Alloy Steel Dimensions Tough Hard Recommended Machining Data Designation W±0.05 R fa° M m IC 8 IN IC Tf m IC 8 o 05 IC o IN IC f groove (mm/rev) GIM 3-4R/LA 3.00 0.20 4.0 2.40 0.08-0.16 GIM 3-8R/LA 3.00 0.20 8.0 2.40 0.08-0.16 GIM 3S-15RA 3.00 0.22 15.0 2.40 0.08-0.16 GIM 3.2-4R/LA 3.20 0.22 4.0 2.40 0.08-0.16 GIM 3.2-8R/LA 3.20 0.22 8.0 2.40 0.08-0.16 GIM 4-4R/LA 4.00 0.25 4.0 3.20 0.10-0.16 GIM 4-8R/LA 4.00 0.25 8.0 3.20 0.10-0.16 For cutting speed recommendations and user guide, see pages 416-422 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) CUTGniP GIM-UT Single-Ended Screw-Clamped Inserts for Parting and Grooving at Low Feeds on CrNi Alloys and Low Carbon Steel Dimensions Tough Hard Recommended Machining Data Designation W±003 R M m IC 8 IN IC f groove (mm/rev) GIM 4.6UT 4.60 0.60 3.80 0.03-0.10 For cutting speed recommendations and user guide, see pages 416-422 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) CUTGniP GIM-UT-RA/LA Single-Ended Screw-Clamped Inserts for Parting at Low Feeds on CrNi Alloys and Low Carbon Steel ±0.1 CH JpL - Jl5.3 RefUR H 5 W Dimensions Recommended Machining Data Designation W±003 R fa° M 2 3 IC f groove (mm/rev) GIM 3UT-1.5RA 3.12 0.25 1.5 2.50 0.03-0.10 For cutting speed recommendations and user guide, see pages 416-422 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) CUTGRiP GDMW 2.4 Utility Double-Ended Inserts for External Turning, Grooving and Parting ±0.1fvr20 Ref. 3B Dimensions Tough Hard Recommended Machining Data Designation W±004 R±0 03 M T max-r IC830 IC808 IC20 z 0 2 IC ap (mm) f turn (mm/rev) f groove (mm/rev) GDMW 2.4 2.40 0.18 2.00 18.00 1 0.25-1.50 0.07-0.12 0.05-0.08 For cutting speed recommendations and user guide, see pages 416-422 For tools, see pages: PADR/L (264) PHGR/L (264) PHSR/L (312) 404 ISCAR