391 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.387

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 387 0391 ENG Lab2u

DOySnlr TWISTED 2-SIDED HGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts Designation HGR/L 3000JS-15D (1) HGR/L 3002J-6D Dimensions Tough Hard Recommended Machining Data W R l fa° IC328 IC830 IC354 f groove (mm/rev) 3.00 0.02 15.20 15.0 0.03-0.07 3.00 0.20 15.70 6.0 0.04-0.12 No depth limit For cutting speed recommendations and user guide, see pages 416-422 (1) Sharp corners For tools, see pages: DGAD/HGAD (378) HGFH (227) INKnr TWISTED 2-SIDED HGN-UT Double-Sided Inserts for Parting and Grooving Low Feeds on Cr-Ni Alloys and Low Carbon Steel R Rr=r =f W L Ref J r j jt Dimensions Tough i Hard Recommended Machining Data Designation W±0.05 R l IC328 IC354 f groove (mm/rev) HGN 3003UT 3.00 0.30 15.80 1 0.04-0.13 No depth limit For cutting speed recommendations and user guide, see pages 416-422 For tools, see pages: C -HELIR/L (225) DGAD/HGAD (378) HELIR/L (226) HFPAD-3 (438) HGAIR/L-3 (444) HGFH (227) HGHR/L-3 (436) HGPAD (227) HGPAD-JHP (227) D&GniFXL DGN-C-XL Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications G For cutting speed recommendations and user guide, see pages 416-422 For tools, see pages: DGTR/L-XL (377) Dimensions Tough Hard Recommended Machining Data Designation W±0.04 R T max-r l Ref. IC830 IC5400 IC808 f groove (mm/rev) DGN 2002C-XL 2.05 0.20 30.00 32.00 0.05-0.16 DGN 3002C-XL 3.00 0.20 32.50 35.00 0.07-0.20 387 PARTING