358 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.354

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 354 0358 ENG Lab2u

GROOVE-TURN USER GUIDE OROOVEWMM jEmwff High Pressure Coolant with Groove-Turn and Parting Tools In grooving and parting operations, applying high pressure coolant provides excellent chip breaking results on all materials. On exotic alloys such as inconel and titanium, it is usually impossible to break the chips with standard external coolant pressure. Applying high coolant pressure provides excellent chip breaking results. On some alloyed and stainless steel, especially when low feeds are applied, high pressure coolant may solve chip breaking problems. High pressure coolant reduces or even eliminates built-up edge phenomenon, especially when machining stainless steel and high temperature alloys. In turning operations, applying high pressure coolant is less effective because the jet is directed to the frontal edge. Grooving Test Material: Titanium (Ti6Al4v) Operation: Grooving Tool: GHDL 25-6-JHP Insert: GIMF 608 IC07 Vc: 50 mm/min f: 0.15 mm/rev Pressure bar Assembly and Safety Guidelines When Using the JET HP ISO Turning and Grooving Tools Before use, please ensure that: The machine door is in a fully closed position The coolant hose is in the correct location and fully tightened with all seals in position A blank plug is inserted into the unused coolant hole All O-rings and washers are in place The coolant hose is tightened securely to the toolholder and tool block, to prevent leakage of coolant Important Always pay attention not to exceed the maximum safe working pressure for GROOVE-TURN tools 340 bar and PARTING OFF tools 300 bar. 354 ISCAR