333 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.329

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 329 0333 ENG Lab2u

; &Q£ MINI FACE LINE MIFHR Bars for Face and Internal Grooving, U ndercutting and Threading Inserts MIFHR... 1 0 Ef M IFHR. 8 -d6 d r f2 j, It £ rarm A i LS-J L fi VB_ J c -r iU m r Designation d d5 f1 f2 L L3 l2 R Insert MIFHR 8SC-8-SRK <1> 8.00 1.2 1.4 3.70 75.00 7.40 11.7 3.80 MI.R 8 SR 14-297 T-8/5 MIFHR 10C-8 10.00 4.0 1.4 4.50 102.50 7.40 12.5 3.80 MI.R 8 SR 14-297 T-8/5 MIFHR 12C-8 12.00 5.0 1.4 5.50 102.50 7.40 12.5 3.80 MI.R 8 SR 14-297 T-8/5 MIFHR 12C-10 <2> 12.00 6.0 2.4 5.50 90.00 11.20 17.2 4.60 MIFR 10 SR 34-506 T-9/5 MIFHR 16C-10 <2> 16.00 6.0 2.4 7.50 90.00 11.20 17.2 4.60 MIFR 10 SR 34-506 T-9/5 Solid carbide shank Only face grooving inserts are available for this tool For inserts, see pages: MEFL (435) MIFR (434) MIGR 8 (329) MITR 8-MT (330) MIUR 8 (329) For holders, see pages: PICCO/MG PCO (holder) (315) MIN CUT MINI FACE LINE MIGR 8 Internal Shallow Grooving Inserts Dimensions IC908 Recommended Machining Data Designation W±0°2 R±0.02 D min T max-r L5 f ap (mm) f turn (mm/rev) f groove (mm/rev) MIGR 8-0.50-0.00 0.50 - 8.50 1.40 6.30 4.0 0.05-0.50 0.03-0.10 0.01-0.03 MIGR 8-1.00-0.05 1.00 0.05 8.50 1.40 6.80 4.0 0.05-0.50 0.03-0.10 0.01-0.03 MIGR 8-1.20-0.05 1.20 0.05 9.20 2.10 6.80 4.7 0.05-0.50 0.03-0.10 0.01-0.03 MIGR 8-1.20-0.60 1.20 0.60 9.20 2.10 6.80 4.7 0.05-0.50 0.03-0.10 0.01-0.03 MIGR 8-1.50-0.05 1.50 0.05 9.20 2.10 6.80 4.7 0.05-0.50 0.03-0.10 0.01-0.03 MIGR 8-1.60-0.80 1.60 0.80 9.20 2.10 6.80 4.7 0.05-0.50 0.03-0.10 0.01-0.03 MIGR 8-2.00-0.10 2.00 0.10 8.90 1.80 6.80 4.4 0.05-0.50 0.03-0.10 0.01-0.03 MIGR 8-2.00-1.00 2.00 1.00 9.20 2.10 6.80 4.7 0.05-0.50 0.03-0.10 0.01-0.03 For cutting speed recommendations, see pages 340-341 For tools, see pages: MIFHR (329) MINI FACE LINE MIUR 8 45° Full Radius Internal Undercutting Inserts Dimensions Recommended Machining Data Designation W±0.02 R±0.02 D min Tmax-r L5 f IC908 p m) ap (m f turn (mm/rev) f groove (mm/rev) MIUR 8-1.00-0.50 1.00 0.50 8.00 1.10 6.70 3.6 0.03-0.50 0.03-0.10 0.01-0.03 MIUR 8-1.5-0.75 1.50 0.75 8.10 1.20 6.70 3.6 0.03-0.50 0.03-0.10 0.01-0.03 MIUR 8-2.00-1.00 2.00 1.00 8.30 1.36 6.70 3.6 0.03-0.50 0.03-0.10 0.01-0.03 For cutting speed recommendations, see pages 340-341 For tools, see pages: MIFHR (329) 329 GROOVE-TURN