299 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.295

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 295 0299 ENG Lab2u

CUTGniP CGIN 26 I nternal Grooving and Turning Blades for GHIC...-50 Bars m "V m Designation W min W max A W1) fmax(1) Flmin(1) F1 max(1) l1 B1 D min CGIN 26K-3 2.80 4.00 2.40 28.0 33.0 10.0 15.0 45.00 26.0 50.00 CGIN 26K-4 3.60 4.50 3.20 28.0 33.0 10.0 15.0 45.00 26.0 50.00 CGIN 26K-5 4.40 6.40 4.00 28.0 33.0 10.0 15.0 45.00 26.0 54.00 CGIN 26A-3 2.80 4.00 2.40 32.5 37.5 14.5 19.5 49.50 26.0 54.00 CGIN 26A-4 3.60 4.50 3.20 32.5 37.5 14.5 19.5 49.50 26.0 54.00 CGIN 26A-5 4.40 6.40 4.00 32.5 37.5 14.5 19.5 49.50 26.0 54.00 For user guide, see pages 340-351 When using a double-ended insert, grooving depth is limited by the insert. For inserts, see pages: GIFI (298) GIFI-E (296) GIFI-E (full radius) (296) GIMIY (295) GINI-E (297) GIPI (297) GIPI (full radius) (298) GIPI-E (296) TIPI-MT (299) For holders, see pages: GHIC-50 (294) Internal Grooving Capacity for CGIN Blades Example: For grooving depth T=12.7 mm and grooving width=4 mm in bore 0D=6O, use blade CGIN 26A-4 and adjust overhang to F1=16 mm. CUTGRiF GIMIY Utility Single-Ended Inserts for Internal Grooving and Turning 5 W Designation GIMIY 304 GIMIY 404 Dimensions Tough Hard Recommended Machining Data W±0.02 R±°.°5 IC830 IC08 IC808 ap (mm) f turn (mm/rev) f groove (mm/rev) 3.00 0.40 0.50-1.50 0.10-0.14 0.05-0.08 4.00 0.40 0.50-2.00 0.13-0.19 0.06-0.11 Dmin for internal applications=20 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: CGIN 26 (295) E-GEHIR / E-GHIR (289) GAIR/L (294) GHIR/L (W=1.9-6.4) (293) GHIR/L-C (W=4-6.4) (293) GHIR/L-SC (W=2-4.8) (293) 295 GROOVE-TURN