254 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.250

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 250 0254 ENG Lab2u

GROOVE-TURN CUTGniP GIF-E (W=4-6 full radius) Precision Double-Ended Full Radius Inserts for Profiling and Grooving Designation GIF 4.00E-2.00 GIF 5.00E-2.50 GIF 6.00E-3.00 Dimensions Tough Hard Recommended Machining Data W±0.02 R±005 M T max-r IC830 IC8250 IC808 IC20 ap (mm) f turn (mm/rev) f groove (mm/rev) 4.00 2.00 3.20 11.80 0.00-2.00 0.20-0.34 0.09-0.17 5.00 2.50 4.00 11.30 0.00-2.50 0.23-0.42 0.11-0.21 6.00 3.00 4.80 10.80 0.00-3.00 0.24-0.50 0.13-0.25 Dmin for internal machining = 70 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) CUTGniP GIF-E (W=8,10 full radius) Precision Double-Ended Full Radius Inserts for Profiling and Grooving ±0.0250= j, w Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±005 M IC830 IC8250 ap (mm) f turn (mm/rev) f groove (mm/rev) GIF 8.00E-4.00 8.00 4.00 6.00 0.00-4.00 0.32-0.67 0.18-0.34 GIF 10.00E-5.00 10.00 5.00 8.00 0.00-5.00 0.35-0.78 0.22-0.40 Dmin for internal machining = 65 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN-8-10D (244) GADR/L-8 (243) GADR/L-JHP (243) GAFG-R/L-8 (451) GHDR/L (long pocket) (240) GHDR/L-JHP (long pocket) (241) GHFG-R/L-8 (450) GHFGR/L-8 (450) GHIR/L (W=7.0-8.3) (301) CUTGniP GIP-E (full radius) Precision Double-Ended Full Radius Inserts for Profiling and Grooving Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±005 M Tmax-r IC830 IC8250 IC808 IC20 IC5010 IC428 IC807 ap (mm) f turn (mm/rev) f groove (mm/rev) GIP 3.00E-1.50 3.00 1.50 2.40 12.30 0.00-1.50 0.18-0.28 0.08-0.15 GIP 4.00E-2.00 4.00 2.00 3.20 11.80 0.00-2.00 0.20-0.34 0.10-0.20 GIP 5.00E-2.50 5.00 2.50 4.00 11.30 0.00-2.50 0.25-0.42 0.13-0.23 GIP 6.00E-3.00 6.00 3.00 4.80 10.80 0.00-3.00 0.27-0.54 0.15-0.27 GIP 6.35E-3.18 6.35 3.18 4.80 10.63 0.00-3.10 0.29-0.57 0.16-0.29 Dmin for internal machining = 70 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) 250 ISCAR