248 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.244

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 244 0248 ENG Lab2u

GROOVE-TURN CUTGRiP CGHN-8-10D Heavy Duty Deep Grooving and Turning Blades r Bi hi W tf Designation W min W max T blade 1) A h1 B1 l1 / CGHN 52-8D 8.00 8.30 50.0 7.40 45.0 52.6 190.00 SR 76-1637 HW 4.0 CGHN 53-8D 8.00 8.30 70.0 7.40 45.0 52.6 260.00 SR 76-1637 HW 4.0 CGHN 52-10D 10.00 11.00 70.0 9.20 45.0 52.6 190.00 SR 76-1289 HW 5.0 CGHN 53-10D 10.00 11.00 100.0 9.20 45.0 52.6 260.00 SR 76-1289 HW 5.0 For user guide, see pages 340-351 (1) When using a double-ended insert, grooving depth is limited by the insert. For inserts, see pages: GDMF (244) GDMN (246) GDMU (246) GDMY (245) GDMY (full radius) (247) GDMY-F (248) GDPY (249) GIA-K (long pocket) (254) GIF (long pocket) (253) GIF-E (W=8,10 full radius) (250) GIF-E (W=8,10) (248) GIPA/GIDA 8 (full radius) (257) For holders, see pages: SGTBK (473) SGTBU/SGTBN (472) CUTGRiP GIMF Utility Single-Ended Inserts for Grooving and Turning 15.SRs' R u- t 4 M tf Hi J 3 w Designation Dimensions Tough 1 Hard Recommended Machining Data W±005 R±°.°5 M IC830 IC8250 IC808 IC908 IC20 IC5010 IC428 IC806 0 9 IC IC4 0 8 IC ap (mm) f turn (mm/rev) f groove (mm/rev) GIMF 406 4.00 0.60 3.40 0.75-2.40 0.19-0.25 0.09-0.16 GIMF 502 5.00 0.20 4.00 0.25-3.00 0.18-0.26 0.11-0.18 GIMF 508 5.00 0.80 4.00 1.00-3.00 0.23-0.35 0.11-0.21 GIMF 605 6.00 0.50 5.00 0.60-3.60 0.22-0.36 0.13-0.23 GIMF 608 6.00 0.80 5.00 1.00-3.60 0.24-0.42 0.13-0.25 GIMF 808 8.00 0.80 6.00 1.00-4.80 0.32-0.56 0.18-0.34 Dmin for internal applications = 70 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGFG 51-P8 (452) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-P8 (240) CGHN-S (239) CGHR/L-P8DG (240) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) 5 W CUTGRiF GDMF Utility Double-Ended Inserts for Grooving and Turning Q=1 r- 30 Ref._, "tf J W Dimensions Tough Hard Recommended Machining Data Designation W±005 R±°.°5 T max-r M IC830 IC8250 IC808 IC5010 IC428 ap (mm) f turn (mm/rev) f groove (mm/rev) GDMF 808 8.00 0.80 27.00 6.00 1.00-4.80 0.32-0.56 0.18-0.34 Dmin for internal machining = 65 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN-8-10D (244) CGPAD-JHP (238) GADR/L-8 (243) GADR/L-JHP (243) GAFG-R/L-8 (451) GHDR/L (long pocket) (240) GHDR/L-JHP (long pocket) (241) GHFG-R/L-8 (450) GHFGR/L-8 (450) GHIR/L (W=7.0-8.3) (301) 7 W 244 ISCAR