233 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.229

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 229 0233 ENG Lab2u

229 DOwur JeTCUT TWISTED 2-SIDED DGFH-JHP Parting and Grooving Blades with Channels for Low and High Pressure Coolant Carrying DO-GRIP Inserts Designation W min W max A A2 l1 B1 h1 D max Insert i ft DGFH 32-2-JHP <1> 1.90 (2) 2.50 1.80 2.4 150.00 32.0 24.8 39.0 DG. 1.../DG. 2... SR M2.0X2.5DIN916 SGC 340 EDG 33A-JHP DGFH 32-3-JHP 3.00 (2) 3.18 2.50 - 150.00 32.0 24.8 90.0 DG. 1.../DG. 3... SR M2.0X2.5DIN916 SGC 340 EDG 33A-JHP DGFH 32-4-JHP 4.00 4.00 3.20 - 150.00 32.0 24.9 90.0 DG. 4.../GRIP 4... SR M2.0X2.5DIN916 SGC 340 EDG 33A-JHP DGFH 32-5-JHP 5.00 5.00 4.00 - 150.00 32.0 24.9 90.0 DG. 5.../GRIP 5... SR M2.0X2.5DIN916 SGC 340 EDG 33A-JHP DGFH 32-6-JHP t1) 6.00 6.35 5.20 - 160.00 32.0 24.9 90.0 DG. 6.../GRIP 6... SR M2.0X2.5DIN916 SGC 340 EDG 33A-JHP For user guide and accessories, see pages 340-355 Only an upper channel Optional, should be ordered separately For DG. 1... insert, modify holder For inserts, see pages: DGN-MF (383) DGN-P (384) DGN-UT/UA (384) DGN-W (381) DGN-WP (385) DGN-Z (383) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGR-P (385) DGR-WP (385) DGR-Z/ZS (384) DGR/L-C DGRC/LC-C (380) DGR/L-J/JS (382) GRIP (229) GRIP (full radius) (230) For holders, see pages: TGTBU-JHP (393) GRIP Utility Double-Ended Inserts for External, Internal and Face Machining T f r J, w JE No depth penetration limit Dimensions Tough Hard Designation W±0.05 R±°.°5 l M IC830 IC8250 8 0 IC IC808 IC908 IC418 IC5010 IC807 ap (mm) f turn (mm/ rev) f groove (mm/ rev) f face-groove (mm/ rev) f face-turn (mm/rev) GRIP 3002Y 3.00 0.20 16.00 2.30 0.25-1.80 0.14-0.18 0.07-0.11 0.08-0.20 0.10-0.20 GRIP 3003Y 3.00 0.30 16.00 2.30 0.40-1.80 0.15-0.19 0.07-0.11 0.08-0.20 0.10-0.20 GRIP 318-040Y 3.18 0.40 16.00 2.30 0.50-1.90 0.17-0.22 0.07-0.12 0.08-0.20 0.10-0.20 GRIP 4002Y 4.00 0.20 19.00 2.80 0.25-2.40 0.16-0.21 0.09-0.14 0.10-0.24 0.15-0.30 GRIP 4004Y 4.00 0.40 19.00 2.80 0.50-2.40 0.18-0.24 0.09-0.15 0.10-0.24 0.15-0.30 GRIP 476-080Y 4.76 0.80 19.00 3.10 1.00-2.80 0.21-0.33 0.10-0.20 0.10-0.24 0.15-0.30 GRIP 5005Y 5.00 0.50 19.00 3.30 0.60-3.00 0.20-0.30 0.11-0.20 0.12-0.24 0.15-0.35 GRIP 5008Y 5.00 0.80 19.00 3.40 1.00-3.00 0.23-0.35 0.11-0.21 0.12-0.24 0.15-0.35 GRIP 6005Y 6.00 0.50 19.00 4.20 0.60-3.60 0.22-0.36 0.13-0.23 0.12-0.28 0.15-0.40 GRIP 6008Y 6.00 0.80 19.00 4.20 1.00-3.60 0.24-0.42 0.13-0.25 0.12-0.28 0.15-0.40 GRIP 635-080Y 6.35 0.80 19.00 4.20 1.00-3.80 0.25-0.44 0.14-0.27 0.12-0.28 0.15-0.40 Recommended Machining Data For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -HELIR/L (225) C -HFIR/L-MC (444) CR HFIR-M (447) DGAD/HGAD (378) DGFH (228) DGFH-JHP (229) DGFS (372) DGPAD-XL-JHP (379) DGTR/L (376) HELIIR/L (301) HELIR/L (226) HFAER/L-4 (440) HFAER/L-5T, 6T (441) HFAIR/L-4 (444) HFAIR/L-DG (445) HFFR/L-T (439) HFHR/L-4T (437) HFHR/L-5T (437) HFIR/L-MC (446) HFPAD-3 (438) HFPAD-4 (441) HFPAD-5 (439) HFPAD-6 (439) HGAER/L-3 (440) HGAIR/L-3 (444) HGFH (227) HGHR/L-3 (436) HGPAD (227) HGPAD-JHP (227) IM-HFIR-MC (446) The Twisted Insert for Face Machining The double-ended, twisted insert body makes it possible to machine deeper than the inserts’ length. A unique chipformer for controlled chip flow in axial and radial directions. The rear angle is slanted in relation to the frontal edge so it does not come into contact with the machined groove surface as the tool penetrates deeply into the workpiece. GROOVE-TURN