196 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.192

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 192 0196 ENG Lab2u

ISOTURN INSERTS fwimt VNGA-2 (CBN) 35° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys JsU Dimensions Designation l di S r lt VNGA 160404-F2 16.60 9.52 4.76 0.40 3.1 VNGA 160404-M2 16.60 9.52 4.76 0.40 3.1 VNGA 160408-F2 16.60 9.52 4.76 0.80 2.2 VNGA 160408-M2 16.60 9.52 4.76 0.80 2.2 VNGA 160408-R2 16.60 9.52 4.76 0.80 2.2 For user guide and cutting speed recommendations, see pages 197-212 Tough 0 0 0 1 0 Hard I 0 o H 0 Recommended Machining Data ap (mm) 0.05-0.50 0.05-0.30 0.05-0.50 0.05-0.30 0.05-0.50 0.05-0.30 0.05-0.50 0.05-0.30 0.05-0.50 0.05-0.30 f (mm/rev) For tools, see pages: MVJNR/L (35) MVVNN (36) VNGA-4 (CBN) 35° Rhombic Inserts with 4 CBN Tips for Machining Hardened Steel IE Dimensions Tough Hard Recommended Machining Data Designation l di S r lt IB25HC IB10HC ap (mm) f (mm/rev) VNGA 160408-M4 16.60 9.52 4.76 0.80 2.2 0.05-0.30 0.02-0.30 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: MVJNR/L (35) MVVNN (36) f9l/fMV1IV VNGG-M4HM (CBN) 35° Rhombic Insert with 4 Chipbreaking CBN Tips for Machining Hardened Steel Dimensions Recommended Machining Data Designation l di S r lt IB25HA ap (mm) f (mm/rev) VNGG 160408-M4HM 16.60 9.52 4.76 0.80 2.2 1 0.50-0.80 0.05-0.20 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: MVJNR/L (35) MVVNN (36) a9% DQ2 MK3 VBMT (CBN) Single Corner CBN Tipped Inserts with a Flat Rake for Machining Hardened Steel 35° 1 JsU Dimensions Tough Hard Recommended Machining Data Designation l di S r lt d1 IB55 IB50 f (mm/rev) VBMT 160404T 16.60 9.52 4.76 0.40 4.5 4.40 0.05-0.39 0.05-0.11 For user guide and cutting speed recommendations, see pages 197-212 di 192 ISCAR