188 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.184

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 184 0188 ENG Lab2u

ISOTURN INSERTS SSGTURUm CNMA (PCD) 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications Dimensions Recommended Machining Data Designation l di S r lt 5 ID ap (mm) f (mm/rev) CNMA 120404D 12.90 12.70 4.76 0.40 3.9 0.10-3.00 0.05-0.26 CNMA 120408D 12.90 12.70 4.76 0.80 3.6 0.10-3.00 0.05-0.26 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A/S-PCLNR/L (81) C -MULNR/L-MW (19) C -PCLNR/L-12-JHP (24) C -PCLNR/L-X (27) C -PCLNR/L-X-JHP (27) DCLNR/L (28) HSK A63WH-MULNR-J12MWX2 (20) HSK A63WH-MULNR/L-MW (19) HSK A63WH-MUMNN-MW (20) MULNR/L-12MW (18) PCLNR/L (23) PCLNR/L-12-JHP (24) PCLNR/L-CA (101) PCLNR/L-X (25) PCLNR/L-X-JHP (26) PCLNR/L-X-JHP-MC (26) S-DCLNR/L (79) S-MULNR-MW (85) A/S-PCLNR/L-X/G (82) ISGTURN CCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum Dimensions ID5 Recommended Machining Data Designation l di S r lt d1 ap (mm) f (mm/rev) CCMT 060202D 6.30 6.35 2.38 0.20 3.1 2.80 0.08-3.00 0.05-0.30 CCMT 060204D 6.30 6.35 2.38 0.40 3.0 2.80 0.10-3.00 0.05-0.30 CCMT 09T304D 9.70 9.52 3.97 0.40 3.9 4.40 0.10-3.00 0.05-0.30 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A/E/S-SCLCR/L (91) C -SCLCR/L-JHP (47) E-SCLCR/L-HEAD (90) PCLCR/L-S (48) PCLCR/L-S-JHP (49) SCACR/L-S (48) SCLCR-PAD (47) SCLCR/L (47) PCLCR/L-JHP-MC (48) DCMT (PCD) 55° Rhombic Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Applications W 8 io y 1 625 Dimensions ID5 Recommended Machining Data Designation l di S r lt d1 ap (mm) f (mm/rev) DCMT 11T302D 11.60 9.52 3.97 0.20 3.7 4.40 0.10-3.00 0.05-0.30 DCMT 11T304D 11.60 9.52 3.97 0.40 3.6 4.40 0.10-3.00 0.05-0.30 DCMT 11T308D 11.60 9.52 3.97 0.80 3.3 4.40 0.10-3.00 0.05-0.29 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A/E/S-SDUCR/L (92) C -SDJCR-JHP (51) C -SDJCR/L (50) C -SDNCN (54) IM-SDNCN (54) PDACR/L-JHP (52) PDACR/L-S (49) SDACR/L (51) SDHCR/L (51) SDJCR/L (50) SDNCN (54) PDACR/L-JHP-MC (53) 55 7 di 184 ISCAR