169 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.165

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 165 0169 ENG Lab2u

1 Q2DWZI SCMT-14 Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys t n 1 S Dimensions Tough Hard Recommended Machining Data Designation l S r d1 IC8250 IC807 IC907 ap (mm) f (mm/rev) SCMT 09T304-14 9.52 3.97 0.40 4.40 1.00-3.50 0.12-0.30 SCMT 120404-14 12.70 4.76 0.40 5.50 1.00-4.00 0.12-0.30 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: SSBCR/L (59) SSSCR/L (59) SCMT-19 Square Inserts with a 7° Positive Flank for Semi-Roughing at Medium to High Feeds 90° t 4 L Dimensions Tough Hard Recommended Machining Data Designation l S r d1 IC830 IC20 IC5005 0 8 IC IC907 ap (mm) fz (mm/t) SCMT 120408-19 12.70 4.76 0.80 5.50 3.00-8.00 0.08-0.15 SCMT 120412-19 12.70 4.76 1.20 5.50 3.00-8.00 0.08-0.15 For cutting speed recommendations, see pages 197-212 For tools, see pages: SSBCR/L (59) SSSCR/L (59) DRDRiLL XOMT-DT Inserts for DR Drills and Boring Bars Dimensions Tough Hard Designation di S R IC28 IC328 IC250 IC350 IC908 IC520M IC428 XOMT 060204-DT 6.16 2.56 0.40 l l Two cutting edges For hard materials and interrupted cut For tools, see pages: A-SXFOR-DR (100) A-SXFOR/L (99) I9%JDQ2 MK3 TCMT-F3P Triangular Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel 5= Dimensions Tough Hard Recommended Machining Data Designation l S r d1 IC8250 IC8150 ap (mm) f (mm/rev) TCMT 090202-F3P 7.60 2.38 0.20 2.50 0.06-1.70 0.03-0.14 TCMT 090204-F3P 7.60 2.38 0.40 2.50 0.10-1.70 0.05-0.20 TCMT 110202-F3P 11.00 2.38 0.20 2.80 0.06-1.70 0.03-0.14 TCMT 110204-F3P 11.00 2.38 0.40 2.80 0.10-1.70 0.05-0.20 TCMT 110208-F3P 11.00 2.38 0.80 2.80 0.13-1.70 0.07-0.28 TCMT 16T304-F3P 16.50 3.97 0.40 4.40 0.10-1.70 0.05-0.20 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: E-STFCR-HEAD (95) S-MTLCR/L-W (95) S-STFCR/L (95) S-STLCR/L (95) STFCR/L (59) STGCR/L (59) Member IMC Group kSSII t S R S ISOTURN INSERTS