150 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.146

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 146 0150 ENG Lab2u

ISOTURN INSERTS SNMG-R3M Double-Sided 90° Square Inserts for Rough Machining on Stainless and Low Carbon Steel fl -fl J ffl k 75“'- Dimensions Recommended Machining Data Designation l di S r IC806 ap (mm) f (mm/rev) SNMG 190612 R3M 19.05 19.05 6.35 1.20 2.00-11.00 0.30-0.90 SNMG 190616 R3M 19.05 19.05 6.35 1.60 2.00-11.00 0.30-0.90 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: DSBNR/L (37) DSDNN (36) DSSNR/L (37) PSBNR/L (41) PSDNN (38) PSSNR/L (39) SNMG-NF Double-Sided Square Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut 4l J ffl k 75°' Dimensions Recommended Machining Data Designation di S r IC8250 ap (mm) f (mm/rev) SNMG 090304-NF 9.52 3.18 0.40 1 0.60-3.00 0.08-0.25 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A-PSKNR/L-09 (96) PSBNR/L (41) PSSNR/L (39) PSSNR/L-JHP (40) SNMG-VL Double-Sided Square Insert with a Chipformer for High Temperature Alloys and Stainless Steel Valves B 4n in Dimensions Tough Hard Recommended Machining Data Designation di S r 0 8 IC 0 9 IC ap (mm) f (mm/rev) SNMG 120404-VL 12.70 4.76 0.40 1.00-5.00 0.10-0.25 SNMG 120408-VL 12.70 4.76 0.80 1.00-5.00 0.10-0.25 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: C -MULNR/L-MW (19) DSBNR/L (37) DSDNN (36) DSKNR/L (37) DSSNR/L (37) HSK A63WH-MULNR-J12MWX2 (20) HSK A63WH-MULNR/L-MW (19) HSK A63WH-MUMNN-MW (20) MULNR/L-12MW (18) PSBNR/L (41) PSDNN (38) PSDNN-JHP (39) PSKNR/L (39) PSKNR/L-CA (101) PSSNR/L (39) PSSNR/L-CA (102) PSSNR/L-JHP (40) di S 146 ISCAR