142 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.138

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 138 0142 ENG Lab2u

ISOTURN INSERTS VNMM-PP Single-Sided 35° Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions Dimensions Tough Hard Recommended Machining Data Designation l di S r IC8250 0 2 IC ap (mm) f (mm/rev) VNMM 12T304-PP 12.40 7.15 3.97 0.40 0.80-2.50 0.12-0.20 VNMM 12T308-PP 12.40 7.15 3.97 0.80 1.00-2.50 0.12-0.25 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A-SVUNR/L (87) C -SVJNR/L-F (35) HSK A63WH-SVVNN-F (36) SVJNR/L-F (34) SVVNN-F (35) SSGTUSm VNMG-TF Double-Sided 35° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions Dimensions Tough Hard Recommended Machining Data Designation l di S r IC830 IC6025 IC8250 IC6015 IC8150 IC806 0 8 IC IC907 ap (mm) f (mm/rev) VNMG 160408-TF 16.60 9.52 4.76 0.80 1.00-3.50 0.10-0.30 VNMG 160412-TF 16.60 9.52 4.76 1.20 1.00-4.00 0.12-0.38 VNMG 220408-TF 22.00 12.70 4.76 0.80 1.00-3.50 0.14-0.36 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: MVJNR/L (35) MVVNN (36) YNMG-F3P Double-Sided 25° Corner Inserts for Internal and External Deep and Narrow Profiling and Undercutting Dimensions Tough 1 Hard Recommended Machining Data Designation l di lt S r IC8250 IC8150 ap (mm) f (mm/rev) YNMG 160404-F3P 16.60 9.52 5.7 4.76 0.40 0.40-3.00 0.03-0.12 YNMG 160408-F3P 16.60 9.52 5.3 4.76 0.80 0.90-4.00 0.05-0.15 Use IYSN 322 seat for these inserts For user guide, see pages 197-212 For tools, see pages: MVJNR/L (35) MVVNN (36) S 138 ISCAR