115 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.111

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 111 0115 ENG Lab2u

SSGTUnN WNMG-M3P Double-Sided Trigon Inserts for Medium Machining Conditions on Steel Dimensions Tough Hard Recommended Machining Data Designation l di S r IC8350 IC8250 IC8150 IC5010 IC807 ap (mm) f (mm/rev) WNMG 06T304-M3P 6.52 9.52 3.97 0.40 0.45-2.50 0.10-0.45 WNMG 06T308-M3P 6.52 9.52 3.97 0.80 0.50-3.00 0.15-0.50 WNMG 06T312-M3P 6.52 9.52 3.97 1.20 0.80-3.00 0.18-0.60 WNMG 060404-M3P 6.52 9.52 4.76 0.40 0.45-2.50 0.10-0.45 WNMG 060408-M3P 6.52 9.52 4.76 0.80 0.50-3.00 0.15-0.50 WNMG 060412-M3P 6.52 9.52 4.76 1.20 0.80-3.00 0.18-0.60 WNMG 080404-M3P 8.70 12.70 4.76 0.40 0.40-3.50 0.10-0.45 WNMG 080408-M3P 8.70 12.70 4.76 0.80 0.50-4.00 0.15-0.50 WNMG 080412-M3P 8.70 12.70 4.76 1.20 0.80-4.00 0.18-0.60 WNMG 080416-M3P 8.70 12.70 4.76 1.60 1.00-4.00 0.23-0.65 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A-PWLNR/L-X/G (84) A/S-MWLNR/L-W (83) A/S-PWLNR/L (84) C -MULNR/L-MW (19) C -PWLNR/L-08-JHP (13) C -PWLNR/L-X (16) C -PWLNR/L-X-JHP (17) DWLNR/L (13) E-PWLNR/L-HEAD (85) HSK A63WH-MULNR-J12MWX2 (20) HSK A63WH-MULNR/L-MW (19) HSK A63WH-MUMNN-MW (20) MULNR/L-12MW (18) MWLNR/L-CA-W (101) MWLNR/L-W (21) PWLNR/L (12) PWLNR/L-08-JHP (13) PWLNR/L-X (14) PWLNR/L-X-JHP (15) PWLNR/L-X-JHP-MC (16) S-DWLNR/L (78) S-MULNR-MW (85) doveIQturn HEAVY DUTY LINE Vi FEEDTUnN WOMG-10-T3P-IQ Double-Sided 6° Negative Side Flank Trigon Inserts for High Feed Turning of Steel ffil EH Dimensions Tough Hard Recommended Machining Data Designation l di S r IC8350 IC8250 IC8150 ap (mm) f (mm/rev) WOMG 100716-T3P-IQ 10.86 15.88 7.94 1.60 1.00-2.80 1.50-3.00 The specified machining recommendations in the above table are valid only for PWXOR/L-TF-IQ tools. For PWLOR/L-IQ tools: ap= 3-7 mm, ft= 0.3-0.8 mm/rev. For user guide, see pages 197-212 For tools, see pages: PWLOR/L-IQ (22) PWXOR/L-TF-IQ (23) S 111 ISOTURN INSERTS