104 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.100

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 100 0104 ENG Lab2u

ISOTURN TOOLS TOOLS A-SXFOR-DR Boring and Drilling Bars with Coolant Holes Carrying XOMT Inserts -> L Ml Right-hand shown Designation I d L2 L3 L f h1 Ga° Gr° h D min Insert A1612M SXF0R-06DR 16.00 180.00 31.0 21.0 6.0 8.5 0 0 15.0 12.50 XOMT 0602 For inserts, see pages: XOMT-DT (165) Drilling Solid Material Range: Dmin=12.5 mm Dmax=14 mm To achieve required diameter 0D, position tool as shown at D + x (x=0.10) to compensate for tool deflection. Use pecking cycle, pulling back 0.1 mm after each 1 mm of DOC. Maximum feed for steel: 0.05 mm/rev; For stainless steel: 0.03 mm/rev Spare Parts Designation A-SXFOR-DR SR 34-508 T-7/51 PL 16 Holders are suitable for right- and left-hand inserts, and boring bars. Optional, should be ordered separately For tools, see pages: A/E-SEXPR/L-03 (92) A/E-SWUCR (99) A/E/S-SCLCR/L (91) (330) MGSIR/L (534) MGUHR (327) Designation d d2 D h L < SBB D16-4 16.00 4.00 15.00 15.0 100.00 HW 2.0 PL 16 SBB D16-5 16.00 5.00 15.00 15.0 100.00 HW 2.0 PL 16 SBB D16-6 16.00 6.00 15.00 15.0 100.00 HW 2.0 PL 16 SBB D16-7 16.00 7.00 15.00 15.0 100.00 HW 2.0 PL 16 SBB D20-4 20.00 4.00 13.00 19.0 100.00 HW 2.0 PL 16 SR M4X6 DIN913 SBB D20-5 20.00 5.00 14.00 19.0 100.00 HW 2.0 PL 16 SR M4X6 DIN913 SBB D20-6 20.00 6.00 15.00 19.0 100.00 HW 2.0 PL 16 SBB D20-7 20.00 7.00 16.00 19.0 100.00 HW 2.0 PL 16 SBB D22-4 22.00 4.00 13.00 21.0 125.00 HW 2.0 PL 16 SR M4X6 DIN913 SBB D22-5 22.00 5.00 14.00 21.0 125.00 HW 2.0 PL 16 SR M4X6 DIN913 SBB D22-6 22.00 6.00 15.00 21.0 125.00 HW 2.0 PL 16 SR M4X6 DIN913 SBB D22-7 22.00 7.00 16.00 21.0 125.00 HW 2.0 PL 16 SR M4X6 DIN913 E/S-SWUBR/L (98) MG-SWUBR/L (99) MG-SWUCR (99) MGCH 100 ISCAR