460 Каталог INGERSOLL 2011 Режущий инструмент и инструментальная оснастка Стр.462

Каталог INGERSOLL 2011 Инструмент и оснастка Стр. 462 0460 Lab2u

GENERAL TECHNICAL INFORMATION INDEXING GHIBMSIUFUaER TIP GUIDELINES Step 1 Step 2 Step 3 Screw tip into shank until finger tight (Figure 1a). Note a .010" gap (Figure 1 b). Use wrench to torque approximately 1 4 turn creating a simultaneous fit (Figure 2). Use .001" shim stock to check the simultaneous fit at the intersection of the tip and the shank. The shim should not be able to enter the intersection (Figure 3a). If it does tighten further with the wrench until there is no gap (Figure 3b). Note: Pre-set torque wrenches (series DT-...) can be purchased. Figure 1b. .010 gap Figure 3a. Shim should NOT enter intersection Figure 3b. Proper fit Series DT-. . . Optional Torque Wrench 462