1145 Каталог INGERSOLL 2011 Режущий инструмент и инструментальная оснастка Стр.1147

Каталог INGERSOLL 2011 Инструмент и оснастка Стр. 1147 1145 Lab2u

GENERAL TECHNICAL INFORMATION INSERT GRADES COATED CARBIDE CERMET AND CARBIDE GRADES Grades ISO Application TT1300 CVD Coated K05 - K15 For high speed turning of cast iron and steel. Thick aluminum oxide coating on a high wear resistant substrate. First choice for machining cast iron (Rough and Finish). TT7310 CVD Coated K05 P05 - (kTT - I3M First choice for machining of ductile cast iron and cast iron. Special coating and though substrate for the best wear resistance. TT8115 CVD Coated - P25 High speed turning of steel. Very high wear resistance. First choice for finishing. TT9215 CVD Coated M10 - M25 For high speed cutting in stainless steel. Very high wear resistance. First choice for finishing particularly in continuous cuts. TT8125 CVD Coated P15 - P35 Steel turning application. Very good combination of wear resistance and toughness. For finish to medium turning of steel. TT9225 PVD Coated M05 - M35 For a wide range of turning in stainless steel. Excellent combination of wear resistance & fracture toughness. TT5030 PVD Coated S05 M05 - S20 - M20 For a wide range of turning of high-temp alloys. Very hard submicron substrate with good fracture toughness. TT9020 TT9030 PVD Coated P15 S15 M20 - (P37 - 25 - M30 For medium speed turning of stainless steel exotic alloys and low carbon steel. Good combination of toughness and wear resistance. TT5100 CVD Coated M15 S15 P20 - M35 P40 For a wide range of turning of sticky materials such as stainless steel and low carbon steel. Excellent chipping resistance and sticking resistance. For finish and medium machining on stainless steel and low carbon steel. TT9235 CVD Coated M30 - M45 For interrupted cutting of stainless steel. Ideal grade for unstable conditions or low cutting speeds. Very good fracture toughness. TT7100 CVD Coated M25 P25 M40 - P45 Low speed turning of steel and stainless steel. Very tough substrate. For heavy roughing with interrupted cut. 1147