341 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.341

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 341 0341 ENG Lab2u

Hoffmann Group 47 <33. sd W W S hP Standard i50= i r y at0.1xD 5535 ha bGaiant solid carbide end mill HPC GARANT Diabolo: Special geometry, coating and carbide, specially for hard machining. Application: For profile milling as a finishing operation. (Plunge milling only to shallow depths). Note: For materials > 60 HRC: a. = 0.07xD. 203372 Ground recess 203382 Suitable for/ v, m/min Alu plastics o aSL, Alu cast 3 >10W5i X < 500 N X < 750 N X <900N X < 1100 N X <1400 N X <50 HRC X <55 HRC X < 60 HRC X <65 HRC X <67 HRC X <70 HRC IN0X < 900 N IN0X >900N Ti >850N Graphite CRP CRP 4 I ISO code nri N P P H N 203372/3382 120 115 100 90 60 O O 0e8 Dr 203372 203382 Diabolo carbide end mill No. of teeth Z 0D4 m L- HPC 203372 203382 203382 203382 203372 203382 mm TiAIN mm 6 58.41 6 - 16 40 5.8 - 80 6 0.014 8 70.88 6 - 19 50 7.7 - 100 8 0.016 10 102.96 6 - 25 60 9.7 - 100 10 0.018 12 159.89 137.12 6 45 30 60 11.6 100 120 12 0.021 16 287.10 285.12 8 65 40 100 15.6 125 150 16 0.025 20 465.30 402.93 10 75 50 100 19.6 135 150 20 0.03 25 543.51 10 75 - 150 - 25 0.036 Solid carbide Standard M Uj > t 45- 4 C TPC erawc a.QOSxD 0.02XD HPC TPC Solid carbide end mill HTC / TPC GARANT Diabolo 70: Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making. Tolerance: Size nominal-0: DcGr. 12:0 /-0,02 mm; DcGr. 16:0/-0,03 mm. Application: Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC. For profile milling as a finishing operation. (Plunge milling only to shallow depths). Note: For materials > 65 HRC: ae = 0.02xD. 3e max= 0-02xD for TPC machining. h„ The values stated in the table are maximum values. 203373 Suitable for/ Alu 1“ v, m/min >,“m XXX <500N < 750 N <900N XXX < 1100 N < 1400 N <55 HRC X X <60 HRC <65 HRC X <67 HRC 3 IN0X IN0X < 70 HRC <900 N > 900 N Ti >850N Graphite GRP CRP Uni a 6 ISO code P P P H nd 203373 1 90 60 50 45 0DC 20 3373 1 Solid carbide slot drill HPC/TPC mm TiAIN 12 wmmm 318.78 16 nm 644.49 mm 56 66 mm 110 130 mm 12 16 J c X <70 HRC X <70 HRC f, mm minax mm 0.021 0.038 0.025 0.042 341