180 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.180

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 180 0180 ENG Lab2u

Hoffmann Group 47 4sbu M Spiral flute machine tap High surface hardness. For use with emulsion (fat content minimum 8%). 137150 Suitable for/ v( m/min Alu plastics qSQ£L, Alu cast >10%Si X <500N X <750N X < 900 N X X X X X < 1100 N < 1400 N <55 HRC < SO HRC <65 HRC INOX INOX < 67 HRC < 70 HRC <900 N > 900 N Ti >850N CuZn Uni a 6 A: ISO code N Mr- bn P H S N 137150 16 20 19 19 9 8 16 Mx pitch 4x0,5 5x0,5 6x0,5 6x0,75 6,5x0,75 8x0,75 8x1 10x1 10x1,25 12x1 13 7150 Machine taps TIN 43.86 46.33 46.33 47.03 52.07 52.07 50.69 64.94 64.94 69.10 Mx pitch U 137150 1 11 X Machine taps L, 1 TIN mm 69.10 100 9 7 73.66 100 9 7 84.94 100 11 9 98.01 100 12 9 113.85 110 14 11 127.22 125 16 12 149.00 125 18 14.5 161.87 140 18 14.5 206.91 140 18 14.5 298.98 150 22 18 mm 10.8 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 28.5 ISO 2X 6HX 40° 1835 B £3xD Synchronised blind hole machine tap with internal coolant supply Sturdy version with right-hand helix and shank to DIN 1835-B. Special geometry for general-purpose use on machines with synchronised spindle drive. The tap is controlled by the synchronising spindle of the machine. Special TiAIN-S coating for optimum tool life. For use with emulsion (fat content minimum 8%). 13 7183 - Form E (lead chamfer: 1.5 - 2 turns) for the deepest possible thread depths. 13 7186 - With internal coolant supply for maximum tool life. Note; For use on synchronised spindles, the GARANT quick-change tapping chuck No. 338100 - 8118 with minimum length adjustment (MLA) ensures highest process reliability. r v 1V4 137183 i-3 i s 137186 Suitable for/ v, m/min Alu plastics oSiQ , Alu cast >10%SI X <500N X <750N X <900N X < 1100 N X <1400 N X <55 HRC X <60 HRC X <65 HRC X <67 HRC X <70 HRC INOX <900 N INOX > 900 N Ti > 850 N CuZn Uni 6 a ISO code N nri P H nn 137180-137186 32 32 33 32 20 12 7 11 9 30 Mx pitch = 137180 = 137183 = 137186 L mm t mm 1 mm Machine tapforsynchronised spindles HSS-E-PM HSS-E-PM HSS-E-PM FormC FormE IC/FormC TiAIN mm 8x1 58.61 58.61 95.83 90 8 6.2 7 10x1 68.51 68.51 106.43 90 10 8 9 10x1,25 69.70 69.70 107.91 100 10 8 8.8 12X1 80.59 80.59 125.24 100 12 9 11 12x1,25 80.59 80.59 125.24 100 12 9 10.8 12X1,5 82.76 82.76 128.21 100 12 9 10.5 14x1,5 98.01 98.01 155.43 100 12 9 12.5 16x1,5 119.30 119.30 183.15 100 12 9 14.5 20x1,5 143.55 143.55 200.97 125 16 12 18.5 180