472 Каталог HOFFMANN GROUP 2016 Производственная мебель для работы и хранения Вер. 47 Стр.472

Каталог HOFFMANN GROUP 2016 Производственная мебель Стр. 472 0472 ENG Lab2u

Hoffmann Group 47 Information about storage of hazardous substances For the protection of people and environment, the handling and storage of hazardous substances is subject to special regulations. To facilitate the correct handling of hazardous substances, they are divided into various classes. GHS (Globally Harmonised Systems of Classification and Collecting of Chemicals). Since 20.1.2009 a new system for classification, identification, and packaging of hazardous substances has been in force. From 1.12.2010 substances must be classified, and from 1.6.2015 mixtures and preparations must be classified and identified to the new regulations. You can find further information on this at: www.reach-info.de/dokumente/Leitfadenbroschuere_GHS-Verordnung.pdf Identification becoming obsolete Classification Hazard symbol 3 Jt S a highly flammable F+ highly flammable F flammable Corrosive severely hazardous to water hazardous to water slightly hazardous to water A Criteria/ hazard category Flashpoint < 0 “C boiling point < 35 "C Flashpoint < 21 "C Flashpoint > 21 “C < 55 °C R sets R12 R11,15,17 RIO 4 1 4 AL N TZ2 Hazard category WGK3 WGK2 WGK1 Water hazard classes (WGK) 1 slightly hazardous to water (e.g. acetone, alcohol). 2 hazardous to water (e.g. diesel, lubricating oil). 3 severely hazardous to water (e.g. used engine oil, chloroform, carbon tetrachloride). Where mixtures occur, the component with the highest hazard rating determines the grade. New to GHS Classification extremely flammable flammable flammable Corrosive effect acutely hazardous to water chronically hazardous to water Hazard symbol Approvals Declaration of conformity (UHP) according to Building Regulations List A, part 1 DIBt, Berlin Previous design type approval tests have been replaced by Declarations of Conformity (OHP) by the manufacturer, stating that the product conforms to the StawaR technical regulations. Criteria / hazard category Hdauses (Hazard Statements) Flashpoint <23% boiling points 35 "C category GHS-1 H 224 and others Flashpoint < 23 °C, boiling point >35 °C category GHS-2 H225 Flashpoint £23’CS60”C category GHS-3 H 226 and others Hazard category GH5-1 H400 GHS-1 H410 GH5-2 H411 GHS-3 H412 GHS-4 H413 General building regulations approval DIBt, Berlin For containment trays of non-metallic materials and storage systems that do not comply with StawaR, a general building regulations approval is issued by the DIBt. Please comply with the specific national regulations and laws. Consult the relevant authorities fro further information. The details that we give are for information only and valid for Germany only. They represent no claim to completeness and are not binding. The path to safe storage 1. Which substances are stored Stored media: Media categorised: Hazardous to water hazard category GHS 1 -4, substances harmful to the environment: They may be stored in containment trays of sheet metal and plastic (PE). Flammable liquids of hazard category GHS 1 -3. Storage in sheet steel trays (galvanised or painted). Storage in plastic trays is prohibited (applies to Germany). -SF Corrosive substances: A Storage in plastic trays. Plastic is resistant to acids and alkalis. JB Not suitable for storage of flammable liquids. The heat that is generated destroys the plastic. CAUTION: Please comply with the prohibition on storing substances together. Substances which could react with each other, if stored alongside one another, must not be stored together - chemical reactions could lead to generation of heat. Note: The corrosion resistance of the materials used and the compatibility of the stored substances has to be demonstrably proven. The user is responsible for this (resistance lists and hazardous substance data sheetsfor the medium which is stored give information). If the resistance lists do not resolve the issues, the material for the containment tray can be the material of the transport container. 2. What quantities are stored The statute demands that the tray provides sufficient containment capacity. This is irrespective of whether the storage is of small drums, 200-litre drums, 1000-litre containers or a variety of drums stored together. Sufficient volume available in the tray: To accept the contents of the largest individual drum, and at least 10% of the total stored quantity. Note: In water protection zones (if storage is permitted at all) the containment must be capable of accepting the entire stored quantity (100%). Calculation example: Containment tray for storage of 20 drums of 20 litres. 10 % = 40 litres. Largest stored drum 20 litres. The necessary containment volume in the tray: 40 litres. Calculation example' 3x200-litre drums are stored.. The largest individual drum is 200 litres. (10 % of the total stored quantity 3x200 litres = 60 litres). = the necessary containment volume in the tray = 200 litres (since that is the size of the largest individual drum). 472