Through hole machine tap Garant MF 60 HSS E 3xD Strong spiral point Guide section with oil grooves, but without chip flutes For use with emulsion

Through hole machine tap Garant MF 60 HSS E 3xD Strong spiral point. Guide section with oil grooves, but without chip flutes. For use with emulsion (fat content minimum 8%). Particularly strong, optimum self-guidance and no recutting when reversed. Versatile in use, reduced tendency to edge build-up - for higher cutting speeds. Suitable for/ vc m/min Alu plastics oSOSU Alu cast >10% Si <500 N <750 N <900 N <1100 N 1 1 <1400 N <55 HRC <60 HRC <67 HRC INOX <900 N INOX >900 N Ti >850 N GG(G) CuZn Gra G C 1 Uni max , TT_. min Air ISO code N P H K N 13 2900- 16 20 19 19 9 8 16 1 J Mx pitch 132900 Uot mm t mm 1 mm nrr Mx pitch 132900 Uot mm t mm 1 mm mrr i&Eamnt 1 1 Garant Through hole machine tap TIN Through hole machine tap TiN 3X0,35 56 2.2 - 2.65 12X1,5 100 9.0 7.0 10.50 4x0,5 63 2.8 2.1 3.50 14x1,5 100 11.0 9.0 12.50 5X0,5 70 3.5 2.7 4.50 16X1,5 100 12.0 9.0 14.50 6X0,5 80 4.5 3.4 5.50 18X1,5 110 14.0 11.0 16.50 6x0,75 80 4.5 3.4 5.20 20x1,5 125 16.0 12.0 18.50 8X0,75 80 6.0 4.9 7.20 22X1,5 125 18.0 14.5 20.50 8x1 90 6.0 4.9 7.00 24x1,5 140 18.0 14.5 22.50 10x1 90 7.0 5.5 9.00 26X1,5 140 18.0 14.5 24.50 12x1 100 9.0 7.0 11.00 30x1,5 150 22.0 18.0 28.50 IQS ifeGaiani Synchronised through hole machine tap with internal coolant supply MF 60' HSSE PM vmJ Standard ISO DIN 13 IS02X 6HX B 1 4 1 1835 B 3xD Version Sturdy design with spiral point and shank to DIN 1835-B. Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine. Special TiAIN-S coating for optimum tool life. For use with emulsion (fat content minimum 8%). 13 2955- With internal coolant supply for maximum tool life. ra 132955 Note For use on synchronised spindles, the GARANT quick-change tapping chuck No. 338100 - 8118 with minimum length adjustment (MLA) ensures highest process reliability. The spiral point evacuates the swarf In the cutting direction. Suitable for/ vc m/min Alu plastics osa&c Alu cast >10% SI <500 N <750 N <900 N <1100 N <1400N n E INOX <900 N INOX >900 N Ti >850 N GG(G) CuZn Gra G C 1 Uni max min Air ISO code N P H K N 132950/2955- 40 40 37 35 22 12 7 12 10 35 m Mx pitch 132950 132955 Uot mm t h6 mm 1 mm I Ao G Through hole for synchron mt”l machine tap sed spindles Internal cooling TIAIN TiAIN mm 8x1 90 8 6.2 7.0 10x1 90 10 8.0 9.0 10x1,25 100 10 8.0 8. 12x1 100 12 9.0 11.0 12X1,25 100 12 9.0 10.8 12x1,5 100 12 9.0 10.5 14X1,5 100 12 9.0 12.5 16x1,5 100 12 9.0 14.5 20X1,5 125 16 12.0 18.5 m Main catalogue Hoffmann Group 46 135 HSS SM26 DIN 374 ISO DIN 13 ISO 2 6H i 4 i <