Synchronised blind hole machine tap Garant with internal coolant supply MF 60 HSSE PM Sturdy version with right-hand helix and shank to DIN 1835-

Synchronised blind hole machine tap Garant with internal coolant supply MF 60 HSSE PM Sturdy version with right-hand helix and shank to DIN 1835-B. Special geometry for general-purpose use on machines with synchronised spindle drive. The tap is controlled by the synchronising spindle of the machine. Special TiAIN-S coating for optimum tool life. For use with emulsion (fat content minimum 896). 13 7183- Form E (lead chamfer 1.5 -2 turns) for the deepest possible thread depths. 13 7186- With internal coolant supply for maximum tool life. c i-3 i one E g - 1V4 137183 Note For use on synchronised spindles, the GARANT quick-change tapping chuck No. 338100 - 8118 with minimum length adjustment (MLA) ensures highest process reliability. - aaawrs.; c 3 1-3 1 137186 Suitable for/ vc m/min Alu plastics g Alu cast >10% Si <500 N <750 N <900 N <1100 N <1400 N 3 900 N Ti >850 N GG(G) CuZn Gra G C I Uni _5r max min Air ISO code N P H K N 13 7180-7186 - 32 32 33 32 20 12 7 11 9 30 1 1 1 Mx pitch 1 137180 Form C 1 137183 I J&EMWlt Blind hole machine tap for synchronised spindles Form E 1 137186 IC / Form C Uot t h6 1 I TiAIN mm 8x1 90 8 6.2 7.0 10x1 90 10 8.0 9.0 10x1,25 100 10 8.0 8.8 12x1 100 12 9.0 11.0 12X1,25 100 12 9.0 10.8 12x1,5 100 12 9.0 10.5 14X1,5 100 12 9.0 12.5 16x1,5 100 12 9.0 14.5 20X1,5 125 16 12.0 18.5 itibisauairtf Blind hole machine tap G 55" HSSE PM DIN 5156 i 3 i '/> 40‘ <2xD Version Hard chrome-plated surface for reduced edge build-up and increased tool life. Application For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection). Note The GARANT micro lubrication system ensures the optimal and accurate distribution of the cutting oil. This eliminates the need for changeover to 8% emulsion. See No. 130100 size S. Suitable for/ vc m/min Alu plastics Alu cast >10% Si <500 N <750 N <900 N RIFl <1100 N 1 1 <1400 N 900 N Ti >850 N GG(G) CuZn Gra G C 1 Uni 'Es' max i min Air ISO code N P H K N 13 7340- 28 28 23 27 28 1 1 Inch i 13 7340 Threads per inch Thread 0 mm Uot mm t mm 1 mm nr n I jfednnt Blind hole machine tap HSSE-PM Hard chrome G1/8 28 9.73 90 7 5.5 8.80 G1/4 19 13.16 100 11 9.0 11.80 G3/8 19 16.66 100 12 9.0 15.25 G1/2 14 20.96 125 16 12.0 19.00 G3/4 14 26.44 140 20 16.0 24.50 Gl 11 33.25 160 25 20.0 30.75 Main catalogue Hoffmann Group 46 157 Standard ISO DIN 13 IS02X 6HX W 1% B 40° 1835 B <3xD Version