Indexable thread-milling bodies Garant Application For parallel internal and external threads; other inserts and taper thread tools available on

Indexable thread-milling bodies Garant Application For parallel internal and external threads; other inserts and taper thread tools available on request, i For threads in through and blind holes, i For universal use cutting left-hand and right-hand threads. i No chip clearance problems, since only short chips are produced. i Low cutting pressure. Note Quick and correct tool selection incl. recommended application values with the USB Cutting Pilot - order under No. 210940 CP. 0 Ds Effective 0 D / overhang L, mm 218000 Insert size L-tOt mm 0 Ds mm Insert screw 1 ibGmt< 1 Indexable thread mill Weldon shank 11,5/12 11 70 12 219923 11,5/20 11 85 20 21 9923 17/22 16 90 16 272530 20/43 16 95 20 272530 22/25 16 125 25 272530 30/52 27 110 25 219925 30/92 27 150 25 21 9925 37/58 27 120 32 219925 37/98 27 160 32 21 9925 j&Garant" Thread milling inserts for thread mill No. 218000 Hir S Version Sturdy inserts. Wide application range due to universal chip breaker geometry. High repeatability. Suitable for/ Vc m/min Alu plastics q 2 L> Alu cast >10% SI <500 N <750 N <900 N FtfeH <1100 N <1400 N 900 N Ti >850 N GG(G) CuZn B Uni -tt1 max min Air ISO code N P H K N HB7720 - 140 120 80 120 110 100 80 60 80 70 70 120 1 M M-LH MF MF-LH > vVv Application 21 8005-8009- For metric internal threads to DIN / ISO (DIN 13) tolerance class 6H. 21 8005 Size 2- For metric internal coarse threads to DIN / ISO (DIN 13) M14, M16. 21 8015- For metric external threads to DIN / ISO (DIN 13) tolerance class 6g. Pitch mm 0,5 1 1,25 1,5 1,75 2 2,5 3 3,5 4 Insert size <1100N INOX (S/STL) <900N fz mm fz mm 21 8005 TU , HB 7720 11 0.1 0.05 21 8007 for HB 7720 16 0.1 0.05 internal Ihieads 60” S 21 8009 HB 7720 27 0.1 0.05 Thread cutting insert 21 8015 for external threads 60° HB 7720 16 0.1 0.05 BSP BSP-LH BSW BSW-LH G G-LH 55° \AA/ NA/v Application For internal and external threads 55° to standard BS 84:1956, DIN 259, ISO 228/1:1982. Tolerance class Medium Class A. Threads per inch 11 14 19 Insert size fz mm INOX XXi> (S/STL) <1100N <900N fz mm 21 8020 21 8022 21 8024 Thread cutting insert for internal and external threads 55° HB 7720 0.1 HB 7720 16 0.1 HB 7720 27 0.1 0.05 0.05 0.05 422 Main catalogue Hoffmann Group 46