Garant Milling / tool materials P (Steel) M (S/STL) K GG(G) N (Alu) S (Ti) H (HRC) Grade description High wear resistance grade for hard machinin

Garant Milling / tool materials P (Steel) M (S/STL) K GG(G) N (Alu) S (Ti) H (HRC) Grade description High wear resistance grade for hard machining up to 60 HRC. HC / TiN-CVD multi-layer coating. HB ’505 HB '505 HB '505 Wear-resistant grade for high-speed machining in steel. HB 7510 HB 7510 Machining of heat-treatable and tool steels, and also cast iron. Ti(C, N)+Al203. H B 75 5 H B 751 5 Micro-grain grade with TiC / TIN and nano-layer coating. HB 7520 hb; '520 HB 7520 HB 7520 Grade for wet and dry machining and high cutting speeds. HC / TiN-CVD multi-layer coating and Ti(C, N +Al203 coating. For NC spotting drills with TICN coating. HB 752 5 HB 7525 HB 7525 HB 7525 HI 5 7525 HB 7525 Wide-range grade for machining steel. Especially suitable for low tensile strength steels. Tough substrate means low susceptibility to fracture. I HB 7530 Ideal for difficult conditions and stainless steels. (P30/40) (M20/35) Micro-grain grade with TiAIN / TiN-PVD or TiAIN multi-layer coating. hb; '535 H B 75 55 hb; '535 HB '535 HB 75. 95 hb; '535 Micro-crystalline grade with balanced basic toughness and nano-layer coating. HB 7630 Tough carbide with CVD multi-layer coating especially for stainless steel. For 45° chamfer mills, with PVD coating. HB 76 5 H B 76 5 High wear resistance grade for hard machining up to 60 HRC. HC / TiN-CVD multi-layer coating. HB 705 hb; '705 Wear-resistant grade for machining cast iron. (P10) (K10/20) carbide with HAIN-CVD coating. HB' '710 hb; '710 Wear-resistant grade for high alloy tool steels, cast iron, and nickel alloys. HB' mo hb; '720 (P20/30) (K20/30) Grades for high cutting speeds. Ideal for dry machining. Specially suited for hard machining, mounted on TopCut indexable face mills. HB 7730 HB 7730 Machining of low tensile strength materials. (P30/40) (M20) Carbide with TiAIN-CVD coating. hb; '735 H B77 15 hb; '735 Specially for machining aluminium at high cutting speeds. hb; '805 Nano-crystalline high performance coating for aluminium, aluminium alloys, and composite materials. Some are diamond-coated. I HB 7810 1 Micro-grain carbide (K20). HB2 coating, for TopCut indexable face mills. hb; '820 Wear-resistant grade for machining titanium and cast iron. HB 7930 HB 7930 Micro-grain grade with high toughness. Suitable for machining stainless steel and materials that are difficult to machine. HB' 7935 Micrograin grade with multi-layer PVD coating for exceptionally long service life, especially on steel materials. H B85 0 H B85 0 Wear-resistant PVD-coated tool material grade for machining steels. HB 9520 Fine-grain substrate for machining steel, with CVD-AI203 coating. Suitable to a limited extent for machining stainless steels. HB 9525 HB 9525 Versatile tool material for a nano-PVD coating. Suitable for unstable machining conditions. HB 9530 HB >530 HB >530 For machining steels of low to medium tensile strength. PVD-coated carbide grade. HB 9535 Carbide grade with fine grain size and PVD multi-layer coating, for use on steels. HB9 540 Carbide grade with high cobalt binding phase proportion and a PVD-TiAIN coating for machining stainless steels. HB 9635 Tool material for general use, very tough. Substrate with a thin coating of CVD-AI203. H B 96' to HB 9640 HB >640 HB >640 Tool grade with PVD multi-layer coating, developed for use on stainless steels. Suitable for unstable machining conditions. HB 9645 HB 9645 HB 9645 Tool material grade with PVD, TIAIN and TiAISiN coatings, with high abrasion resistance and relatively low cobalt content for use under stable machining conditions. HB 9715 HB 9715 CVD coated carbide grade with Ti(C,N) and Al203 coating layers. Specially developed for machining cast iron. HB 9720 Micrograin structure with TIAIN, PVD multi-layer coating. Suitable for superalloys such as Inconel 718. HB 720 HB 720 HB 720 HB 720 HE 720 Micro-grain solid carbide with AlCrN coating for general-purpose use. HB 730 HB 730 HB 730 HB 730 HB 730 All-round grade for wet and dry machining in steel and stainless steel materials, also cast iron. HB 73 5 HB 73 5 HB 735 HB 735 Tool material grade with PVD-TiAIN coating. Suitable for use across a wide range of materials. IB 925 IB 925 IB 92 5 374 Main catalogue