Carbide hole saw Garant HOLEX plain shank Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened) Na

Carbide hole saw Garant HOLEX plain shank Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened). Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure. Exchangeable centre drill, shank with 3 clamping faces. 11 8400- Cutting width 2 mm for all sizes. 0- tolerance + 0.10 / - 0.05 mm Dimension L size 55 35 mm / size 60 60 mm 11 8500- Dimension L all sizes 8 mm 11 8505 - Cutting width 1.9 mm for all sizes. 0 tolerance + 0.15 / - 0.05 mm Dimension L all sizes 11.8 mm Application For use on stationary machines. Highly suitable for sheets of plastic (GRP and CRP). 11 8400- For flat material up to 4 mm thickness, and pipes of up to 4 mm wall thickness. 11 8500- Only for flat material up to 4 mm thickness. 11 8505 - Only for flat material up to 5 mm thickness. (T) Wall thickness Centre punching (5) Guidance by centre drill (4) Apply a low and even pressure as soon as the cutting edges are in contact with the material. Do not tilt the drill. 11 8505 Suitable for/ vc m/min Alu plastics Alu cast >10% Si <500 N <750 N <900 N <1100N <1400 N <55 HRC <60 HRC <67 HRC INOX <900 N INOX >900 N Ti >850 N GG(G) CuZn Gra G C 1 Uni max min Air ISO code N P H K N 11 8400-8505 - 70 50 50 35 80 101 1 1 0 11 8400 11 8500 118505 Shank ex 0 11 8400 118500 118505 Shank ex lifec Carbide ant1 lole saw HOLE/. Carbide hole saw 118400 118500 11 8505 life El Carbide ant11 lole saw HOLEX Carbide hole saw 118400 118500 11 8505 mm long short short mm long short short mm 16 6 10 44 10 - 17 6 - 45 10 - 18 6 10 46 10 - 19 6 - 47 10 - 20 6 10 48 10 - 21 6 10 49 10 - 22 6 10 50 10 10 23 10 - 51 10 - 24 10 - 52 10 - 25 10 10 53 10 - 26 10 - 54 10 - 27 10 10 55 10 - 28 10 - 56 10 - 29 10 - 58 10 - 30 10 10 60 13 10 31 10 - 65 13 - 32 10 10 68 13 - 33 10 - 70 13 13 34 10 - 75 13 - 35 10 10 80 13 - 36 10 - 85 13 - 37 10 - 90 13 - 38 10 - 95 13 - 39 10 - 100 13 - 40 10 10 105 13 - 41 10 - 110 13 - 42 10 - 115 13 - 43 10 - 120 13 - Spare centre drill HSS VN J Standard 0xoverall length mm 6X69 8X69 8X94 6X48 8X48 u nirn I Acnt' Spare centre drill for hole saw No. 118400 u<< nccn 1 jfecmnf 1 Spare centre drill for - 1 1 °33U hole saw No. 118500 vj 1 qccc hqlejC. Spare centre drill for - 1 1 0333 hole saw No. 118505 For hole saw 0 (11 8450) mm 16-22 23-55 60 For hole saw 0 (11 8550) mm - 16-58 60-120 For hole saw 0 (11 8555) mm - 16-70 - 118450 11 8550 11 8555 Main catalogue Hoffmann Group 46 53 Carbide VN J Standard Version