661 Каталог FACOM 2005 Профессиональный ручной инструмент для предприятий Стр.664

Каталог FACOM 2005 Профессиональный ручной инструмент Стр. 664 0661 ENG Lab2u

ANTISTATIC SERIES ELECTRONICS PLIERS A Safety first Never use antistatic tools when working on live components. STATIC ELECTRICITY CAN DESTROY ELECTRONIC COMPONENTS As they become smaller and more sophisticated electronic circuits are increasingly at risk from static electricity especially when the charge can build up to several thousand volts. CONTROLLING ELECTROSTATIC BUILD-UP MAKES ECONOMIC SENSE. While the cost of a faulty component at acceptance-test stage is relatively small it starts to increase once the component has reached the board and escalates markedly once a fault involves sending back a complete unit. But the most important benefit in controlling static electricity is customer satisfaction. Facom solves the problem with an antistatic range to EN 100-015 1. For safe work on printed circuits all tools and equipment used should be interlinked and effectively connected to earth. Measurements and tests on antistatic screwdrivers and electronics pliers have been carried out in laboratories approved by the electrical industry. 17 Bullet-nose pliers SLIM-JOINT MODELS FOR PRECISION W ISO 9654 Suitable for miniature electronic components. Flush-cut model is longer for increased reach. D 55g. F Cut Cu Ni wire 0 mm Fe wire 30 HRc 0 mm 405.8E h 02 1 05 406.8E H 01 1 1 407.8E i 01 1 1 COMPACT MODELS FOR MANOEUVRABILITY W ISO 9654 Slimmer bullet-nose profile combines cutting performance with manoeuvrability. Available with offcut retaining system. Model 405 is suitable for cutting piano wire 0 0.4 mm. D 65g. F Cut Cu Ni wire 0 mm Fe wire 30 HRc 0 mm 405.E h 03 13 07 406.E H 01 13 07 407.E i 01 13 1 664 catalogue FACOM F05 11