1674 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.P218

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. P218 1674 Lab2u

DRILLINGOlMDEXABLE type) STAW Small Diameter Indexable Drill NOTES ON USE INSERT INSTALLATION 1. Before inserting the insert into the holder, ensure that there are no foreign objects or dirt in the holder slot or slit. If there are any foreign objects or dirt, use compressed air to remove them. 2. Use the provided wrench to loosen the inner screw to open the tip of the holder, then put the insert into the holder slot as shown in figure 1. ‘Ensure that the wrench is firmly in contact with the base of the inner screw head when tightening. 3. After the insert has been set in the holder slot, tighten the inner screw while holding the insert lightly as shown in figure 2 to securely clamp and locate the insert. 'Ensure that the wrench is firmly in contact with the base of the inner screw head when tightening. Tighten the clamp screw according to the torque below. Internal screw Holder slot Stopper Sllt Drill Diameter (mm) Clamp Torque N m 10 -12.9 1 13 -15.4 2 15.5-18.4 2.5 4. Check there is no gap between the bottom of the insert and holder slot. Alignment mark OK No clearance -Clearance Note 1) Poor or incorrect clamping of inserts can cause poor drilling performance and/or drill breakage. Therefore ensure that the alignment marks on both the body and insert are aligned when setting. When machining, use safety guards and goggles. SPARE PARTS Applicable Holder Pack Order Number (Internal Screw & Stopper) Internal Screw Stopper ST AWSS/SN/M N/LN1000S16 WS203107TPS-35LH WS203107TPS WS35LH ST AWSS/SN/M N/LN1050S16 WS203107TPS-35LH WS203107TPS WS35LH ST AWSS/SN/M N/LN 1100S16 WS203108TPS-35LH WS203108TPS WS35LH ST AWSS/SN/M N/LN 1150S16 WS203108TPS-35LH WS203108TPS WS35LH ST AWSS/SN/M N/LN1200S16 WS203108TPS-35LH WS203108TPS WS35LH ST AWSS/SN/M N/LN1250S16 WS203108TPS-35LH WS203108TPS WS35LH ST AWSS/SN/M N/LN1300S16 WS253909TPS-45LH WS253909TPS WS45LH ST AWSS/SN/M N/LN1350S16 WS253909TPS-45LH WS253909TPS WS45LH ST AWSS/SN/M N/LN1400S16 WS253909TPS-45LH WS253909TPS WS45LH ST AWSS/SN/M N/LN1450S16 WS253909TPS-45LH WS253909TPS WS45LH ST AWSS/SN/M N/LN1500S20 WS253909TPS-45LH WS253909TPS WS45LH ST AWSS/SN/M N/LN1600S20 WS304912TPS-55LH WS304912TPS WS55LH ST AWSS/SN/M N/LN1700S20 WS304912TPS-55LH WS304912TPS WS55LH ST AWSS/SN/M N/LN1800S20 WS304912TPS-55LH WS304912TPS WS55LH Note 1) The parts are packaged internal screw, stopper and operation manual. Please replace the parts in accordance with the operation manual.