1445 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.N017

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. N017 1445 Lab2u

FACE MILL QF2000 (SINGLE BOLT MOUNTING TYPE) One Piece Type ( 0160) FEATURES 1. Simply turning a clamp bolt fixed to the adapter a few times enables cutter exchange. 2. The cutter needs to be turned 90° before removal. This prevents the cutter from falling free. 3. Applicable to both face milling and boring tools. 4. Cutter exchange time is less than 1 min. Clamp Bolt Cutter Body Machine Spindle Yellow Mark / Yellow Mark Two Piece Type ( 4200) FEATURES 1. Internal diameter of the cutter body has 4 6 mounting teeth. The adapter has the same mounting teeth and a single clamp bolt for installation. 2. The cutter needs to be turned 15° before removal. This prevents the cutter from falling free. 3. Cutter exchange time is less than 1 min. FEATURES 1. Gourd shaped hole type is employed. Turning 4 6 bolts enables cutter exchange. 2. The cutter needs to be turned 15° before removal. This prevents the cutter from falling free. 3. Cutters with >0250 are made up of 2 parts. Thus, weight at the time of installation is reduced and safety is improved. 4. Standard adapters facilitate installation of cutters with the same diameter and different insert shapes. 5. Cutter exchange time is less than 3 5 min. Clamp Bolt Mounting Teeth QF1000 (GOURD SHAPED HOLE TYPE) One Piece Type (O Type 0200) Two Piece Type (T Type 4250) N017 TOOLING SYSTEM