1225 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.M069

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. M069 1225 Lab2u

INSERTS Work Material IM Non-ferrous Metal Cutting Conditions : : Stable Cutting C : General Cutting X: Unstable Cutting Shape Order Number Dimensions (mm) LE W1 BS RE Geometry General Purpose GOER1404PXFR2 GOER1408PXFR2 14.0 14.0 5.0 5.0 9.0 9.0 4.2 4.2 2.0 2.0 0.4 0.8 Lm W1 I new GOER1408PXFR2-8 14.0 8.0 9.0 4.2 2.0 0.8 Long Edge new GQER1401ZXFR2 14.0 5.0 9.0 4.2 2.0 0.1 Burr Prevention Note 1) If general purpose inserts (RE = 0.4mm, 0.8mm), burr prevention inserts and long edge inserts are used together, they will not be able to sufficiently display their full performance. Inserts of the same shape should be used according to the application. Note 2) The cutting diameter will change depending on the shape. Be particularly careful when cutting near vertical walls, since there is a possibility of interference with the holder. Note 3) The long edge inserts corresponds to the gate remainder and can not be used for constant depth cutting. RECOMMENDED CUTTING CONDITIONS M Wet cutting Work Material Characteristics Grade VC Depth of Cut (mm) fz (m/min) ae ap (mm/t.) N MD2030 MD220 2500 (2000-3000) 5 0.2 DC 3.0(0.5 3.0) 0.08 (0.05-0.2) Si 5% £0.5 DC £ 2.5(0.5 2.5) £0.8 DC £ 2.0(0.5 2.0) MD2030 MD220 2500 (2000-3000) £0.2 DC £ 3.0(0.5 3.0) 0.08 (0.05-0.2) 5% Si 10% £0.5 DC 2.5(0.5 2.5) Aluminium Alloy £0.8 DC £ 2.0(0.5 2.0) MD2030 MD220 600 (400-800) £0.2 DC £ 3.0(0.5 3.0) 0.08 (0.05-0.2) 10% Si 15% 0.5 DC £ 2.5(0.5 2.5) £0.8 DC £ 2.0(0.5 2.0) MD2030 MD220 600 (400-800) £0.2 DC £ 3.0(0.5 3.0) 0.08 (0.05-0.2) Si 2 15% £0.5 DC £ 2.5(0.5 2.5) 0.8 DC £ 2.0(0.5 2.0) Note 1) Please adjust the depth of cut depending on the width of cut. Note 2) When using the long edge insert, please select the conditions depending on depths ofcut (ap) excluding the length of the gate. Note 3) Wet cutting is recommended. SPARE PARTS > Q001 TECHNICAL DATA > R001 M069 INDEXABLE MILLING