831 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.J209

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. J209 0831 Lab2u

CARBIDE Work Material Carbon steel,Alloy steel,Alloy Tool Steel, Pre-hardened steel, Precipitation hardeningstainless steel AIS11055, AISI P21, ASTM 630 Hardened steel (45-55HRC) Copper, Copper alloys R RE (mm) Neck length LU (mm) Revolution (min'1) Feed rate (mm/min) Depth of cut ap (mm) Revolution (min'1) Feed rate (mm/min) Depth of cut ap (mm) Revolution (min"1) Feed rate (mm/min) Depth of cut ap (mm) R1 4 40000 8000 0.1 32000 5000 0.1 32000 5000 0.2 6 40000 8000 0.1 32000 5000 0.1 32000 5000 0.2 8 40000 6000 0.1 32000 3800 0.1 32000 3800 0.2 10 40000 5000 0.08 32000 3200 0.08 32000 3200 0.16 12 40000 5000 0.08 32000 3200 0.08 32000 3200 0.16 16 32000 3500 0.05 26000 2200 0.05 26000 2200 0.1 20 10000 1000 0.04 10000 800 0.04 10000 800 0.08 25 10000 1000 0.04 10000 800 0.04 10000 800 0.08 30 10000 800 0.02 10000 640 0.02 10000 640 0.04 35 10000 600 0.02 10000 480 0.02 10000 480 0.04 40 8000 400 0.01 8000 320 0.01 8000 320 0.02 R1.25 10 36000 6000 0.12 29000 3800 0.12 29000 3800 0.24 15 32000 4500 0.1 26000 2900 0.1 26000 2900 0.2 20 26000 3200 0.07 21000 2000 0.07 21000 2000 0.14 25 12000 1400 0.06 8000 720 0.06 8000 720 0.12 30 8000 900 0.04 8000 700 0.04 8000 700 0.08 35 8000 800 0.02 8000 640 0.02 8000 510 0.04 R1.5 6 32000 7000 0.15 26000 4500 0.15 22000 3800 0.3 10 32000 7000 0.15 26000 4500 0.15 22000 3800 0.3 16 32000 5000 0.1 26000 3200 0.1 22000 2700 0.2 20 27000 3800 0.1 22000 2400 0.1 22000 2400 0.2 25 21000 2700 0.08 17000 1700 0.08 17000 1700 0.16 30 10000 700 0.08 6000 560 0.08 6000 560 0.16 35 6000 700 0.06 6000 560 0.06 6000 560 0.12 40 6000 600 0.04 6000 480 0.04 6000 480 0.08 R1.75 15 27500 4400 0.13 22000 2800 0.13 18000 2300 0.26 25 23000 3600 0.1 18000 2200 0.1 18000 2200 0.2 35 10000 1400 0.08 10000 1100 0.08 10000 1100 0.16 45 7500 900 0.04 7500 720 0.04 7500 720 0.08 R2 10 24000 6000 0.2 19000 3800 0.2 16000 3200 0.4 20 24000 3800 0.15 19000 2400 0.15 16000 2000 0.3 30 20000 3000 0.1 16000 1900 0.1 16000 1900 0.2 40 12000 1700 0.1 12000 1400 0.1 12000 1400 0.2 50 8000 1000 0.05 8000 800 0.05 8000 800 0.1 R2.5 20 22000 6000 0.2 18000 3800 0.2 13000 2800 0.4 25 22000 4400 0.2 18000 2800 0.2 13000 2000 0.4 30 22000 3800 0.15 18000 2400 0.15 13000 1700 0.3 40 22000 3600 0.1 18000 2300 0.1 13000 1600 0.2 R3 20 20000 6000 0.2 16000 3800 0.2 11000 2600 0.4 30 20000 6000 0.2 16000 3800 0.2 11000 2600 0.4 40 20000 4500 0.15 16000 2800 0.15 11000 2000 0.3 50 20000 3000 0.15 16000 1900 0.15 11000 1300 0.3 CC LlI CL LU cc cc m 3 o DC O in Depth ofcut £0.1 RE (RE£1) 0.2RE (RE>1) RE:Radius Note 1) When the inclination angle of machined surface is large, or machining with large cutting load such as corner area, reduce the revolution and feed rate. Note 2) The use of oil mist is recommended when machining with small diameter. Note 3) The revolution and feed rate can increase for the small depth of cut. Note 4) Cutting condition may be considerably different due to the overhang (milling depth), depth of cut, and machine tools. Please see the above table as a standard. Note 5) For hardened steel over 55HRC, use VF2XLB. Note 6) Standard cutting conditions of austenitic stainless steel and titanium alloy, please reduce to 60% revolution and 45% feed rate. (Hardened steel (45 55HRC) table above) J209