626 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.J004

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. J004 0626 Lab2u

SOLID END MILLS COATING TECHNOLOGY IMPACT MIRACLE REVOLUTION Coating The combination of the (Al, Cr, Si) N coating (newly-developed), which has a high oxidation temperature and high lubricity, together with the (Al, Ti, Si) N coating, which has better wear resistance and high adhesion, allows hardened steel with even greater strength to be maintained. (AI,Cr,Si)N jAI,Ti,Si)Njg Ultra Micro-grain Cemented Carbide Strong S Curve IMPACT ★High Oxidation Temperature ★High Lubricity ★Better Wear Resistance ★High Adhesion New Negative Cutting Edge Shape and Slow Helix Angle Cutting Edge New ZERO-p Surface Newly-developed Surface Reforming Technology MIRACLE Coating New Ball Geometry for Mirror Finish Cutting For higher hardness, higher speed and longer tool life In comparison with the conventional coating single-phase nano crystal coating technology offers higher coating hardness and heat resistance. When machining hardened steels it can be seen that the IMPACT MIRACLE coating offers a lower friction of coefficient and as such prevents abnormal damage such as chipping. Properties of IMPACT MIRACLE COATING IMPACT MIRACLE Single-phase nano coating (AI,Ti,Si)N (AI,Ti,Si)N (AI.Ti)N Hardness (HV) 3700 3200 2800 Oxidation Temperature (°C) 1300 1100 840 Adhesion (N)11 100 80 80 Wear coefficient2)(800°c) 0.48 0.53 0.58 1) Adhesion : Measured by critical load scratch test. 2) Coefficient of friction : Measured by ball-on-disk method. (Counter gear: AISI D2 60HRC) dpMS plus Coating Suitable coating for a broad range of workpiece materials such as carbon steel, alloy steel and hardened steel of approx. 50HRC. Our original coating technology enables a multilayer of (AI,Ti)N and (AI,Cr)N. It allows machining of a wide range of workpiece materials. Properties of MS plus coating (AI,Ti,Cr)N multilayer (AI,Ti)N (AI,Cr)N Hardness (HV) 3200 2800 3100 Oxidation Temperature fC) 1100 800 1100 Adhesion (N) 100 80 80 J004