526 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.F102

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. F102 0526 Lab2u

GROOVING / CUTTING OFF GROOVING / CUTTING OFF LIMITATION OF THE MAXIMUM GROOVE DEPTH For Internal Grooving When using the mono block type The maximum groove depth is not limited by the cutting diameter. When using the modular blade type The maximum groove depth is limited by the cutting diameter. Due to interference of this part, the maximum groove depth is limited by the cutting diameter. Shank Diameter=32mm (GYM20 Blade) ,-.12 E 11.5 E.11 £ 10 & 9 Q 8 g , II l L GYM20L/RA-D10 9 GYM20L/RA-E10 £ 6 >> -GYM20L/RA-F10 Workpiece Diameter (mm) Shank Diameter=40mm (GYM25 Blade) E14 S13 12 Q.11.5 13 11 Q 11 D 10 0 v (.D 8 7.5 1 7 Shank Diameter=40mm (GYM20 Blade) GYM20L/RA-G12 E14 E 13 12 0.11.5 a11 a 10 > 8 ’ O 8 7.5 n 7 GYM25L7RA-D12 GYM25L/RA-E12 GYM25L/RA-F12- Workpiece Diameter (mm) 95100 115125 160 Workpiece Diameter (mm) Workpiece Diameter (mm) Shank Diameter=50mm (GYM25 Blade) 10 RECOMMENDED CUTTING SPEED For Internal Grooving Work Material Hardness Grade Cutting Speed (m/min) 50 100 150 200 250 300 P Mild Steel 160HB VP20RT 80 VP10RT 190 IM 190 NX2525 I 70 170 Carbon Steel Alloy Steel 160 280HB VP20RT 160 1401 VP10RT 70 Q50 MY5015 190 2101 NX2525 55 H l35l 280HB< VP20RT 5