Главная

Каталоги / Catalogs

Словарь   Популярное
Металлообработка
на заказ
тел. 89210954455
instroykomplekt@mail.ru
Обновлено 2016-12-06 06:32:52 Просмотров 35
Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

TUNGALOY | Каталог TUNGALOY 2007 Режущий инструмент (Всего 520 стр.)


Tungaloy ceramics consist of high-purity fine powder oxides nitrides and carbides sintered through normal pressure gas pressure and HIP sintering The fine

471 Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр.465

471 Tungaloy ceramics consist of high-purity fine powder oxides nitrides and carbides sintered through normal pressure gas pressure and HIP sintering The fine Каталог TUNGALOY 2007 Режущий инструмент для точения фрезерования сверления на металлообрабатывающем оборудовании и станках Стр. 465

Tungaloy ceramics consist of high-purity fine powder oxides nitrides and carbides sintered through normal pressure gas pressure and HIP sintering The fine

Tungaloy ceramics consist of high-purity fine powder oxides nitrides and carbides sintered through normal pressure gas pressure and HIP sintering. The fine and dense structure ensures superiority in wear resistance adhesion resistance oxidation resistance and heat resistance. These grades enable high-speed cutting over a wide range from finishing to light cutting offering high accuracy and high quality finished surfaces. Ceramics grades are classified into alumina-base and silicon-nitride-base groups each selectable according to the application. Microstructure of LX11 (SEM) Microstructure of FX105 (SEM) Application Grade (Color) Specific gravity Hardness (HRA) Transverse rupture strength (GPa) Fracture Toughness K1c (MPa m1 2) Modulus of elasticity (GPa) Features FX105 3.24 93.0 1.3 6.1 290 A silicon nitride based ceramics used for high speed cutting of cast irons. Has superior strength toughness and Grey thermal characteristics compared with alumina-base ceramics. CX710 3.20 92.9 1.1 6.3 290 Si3N4-based ceramics for high speed cutting of cast irons. Higher of toughness and heat conductivity than FX105. K Cast irons Grey LX21 4.24 94.0 0.8 4.3 370 Al2O3-based ceramics for continuous cutting of cast irons. With adding titanium carbide to alumina its toughness is improved while maintaining excellent wear resistance. Black CXC73 3.24 93.0 1.3 6.1 290 CVD coated Si3N4 -based ceramics. Excels good wear resistance and long tool life by thick and stable a-Al2O3 layer. Gold H Hard materials LX11 4.35 94.0 0.9 4.3 400 Al2O3-based ceramics used for continuous turning of ferrous hard materials. Improved strength and toughness by fining Gold down the crystallized particles of alumina and titanium carbonitride. Grades Ceramics Application K Cast irons H Hard materials LX11 FX105 CX710 CXC73 LX21



TUNGALOY | Каталог TUNGALOY 2007 Режущий инструмент (Всего 520 стр.)

Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

468 Grades Polycrystalline Cubic Boron Nitride Compacts (PCBN) T-CBN Application K Difficult-to-cut materials BX90S BX950 BX480 BXC30 BX330 H Hard materials Th Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 462 ENG468 469 PCBN T-CBN C463 Polycrystalline Cubic Boron Nitride Compacts (PCBN) T-CBN Application Grade Hardness Microstructure (Hv) Transverse rupture strength (GPa) Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 463 ENG469 470 Diamond is the hardest known material on earth This is an advanced diamond-based tool material in which tiny diamond crystals are tightly sintered on the c Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 464 ENG470 Diamond is the hardest known material on earth This is an advanced diamond-based tool material in which tiny diamond crystals are tightly sintered on the c472 Cemented carbide Tungaloy is manufactured by sintering refractory carbide such as tungsten carbide (WC) titanium carbide (TiC) and tantulum carbide (TaC) p Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 466 ENG472 Cemented carbide Tungaloy is manufactured by sintering refractory carbide such as tungsten carbide (WC) titanium carbide (TiC) and tantulum carbide (TaC) p473 Micro-Alloy is characterized by the WC hard phase (major component) which is extremely fine (average particle size 1 im or less) when compared with normal Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 467 ENG473 Micro-Alloy is characterized by the WC hard phase (major component) which is extremely fine (average particle size 1 im or less) when compared with normal474 Turning Tools Name of tool parts Relating angles between tool and workpiece Calculation formulas for turning Cutting speed When calculating cutting speed f Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 468 ENG474 Turning Tools Name of tool parts Relating angles between tool and workpiece Calculation formulas for turning Cutting speed When calculating cutting speed f


См.также / See also :

Каталог TUNGALOY 2014 Металлорежущий инструмент и инструментальная оснастка
Каталог
TUNGALOY
2014
Металлорежущий
инструмент
(968 страниц)
Каталог TUNGALOY 2009 Металлорежущий инструмент для точения фрезерования сверления на металлообрабатывающих предприятиях
Каталог
TUNGALOY
2009
Металлорежущий
инструмент
(555 страниц)

---

---



Главная / Home | Каталоги / Catalogs | Словарь / Index | Популярное / Popular | Контакты / Contacts

Все использованные информационные материалы являются собственностью их Уважаемых Владельцев.
All copyrights remain by their owners.

updated 06.12.2016 at 06:32:52 for those 35 interested and for those 29 unique visitors who already was here 35 times. GGServer20170325 generate this page in 0,002 seconds.

Система "Промышленные каталоги" / Industrial catalogs
© 2002 - 2017 Лаборатория 2У / Lab2U
Стр. / Page Lab2U1723507432