Лаборатория 2У    Lab2U

Каталоги / Catalogs

Словарь   Популярное


Металлообработка
на заказ
тел. 89210954455
instroykomplekt@mail.ru
Обновлено 2017-02-17 04:44:55 Просмотров 46
Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

KEMMLER | Каталог KEMMLER 2017 Инструмент для обработки на станках (Всего 720 стр.)


Term definitions of HSK-A interface for automatic tooling systems o Gripper groove: circular groove Index notch: sickle-shaped notch across gripp

667 Каталог KEMMLER 2017 Инструмент и приспособления для обработки на станках Стр.13.32

667 Term definitions of HSK-A interface for automatic tooling systems o Gripper groove: circular groove Index notch: sickle-shaped notch across gripp Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.32

Term definitions of HSK-A interface for automatic tooling systems o Gripper groove: circular groove Index notch: sickle-shaped notch across gripp

Term definitions of HSK-A interface for automatic tooling systems o Gripper groove: circular groove Index notch: sickle-shaped notch across gripper groove Keyway on collar: index notch or for attachment in tool magazine or grippers. With HSK-B/D also provides form closed torque transmission to spindle. o Coding/identification: bore in collar for attachment of identification system (coding chip) Thread for coolant: for attachment of coolant supply set Keyway on taper shank: form closed torque transmission to spindle Radial bore in taper shank: necessary for manual clamping systems Clamping shoulder: circular chamfer for drawing in the tool Position of the tool edge of single-edged tools KEMMLER 13.32 13



KEMMLER | Каталог KEMMLER 2017 Инструмент для обработки на станках (Всего 720 стр.)

Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

664 Large manual machines and CNC machines use toolholders that have been precisely ground with a male taper that mates with the machine's specific f Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.29664 Large manual machines and CNC machines use toolholders that have been precisely ground with a male taper that mates with the machine's specific f665 The pull stud allows the locking drawbar of the spindle to pull the toolholder firmly into the spindle and to release the toolholder automaticall Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.30665 The pull stud allows the locking drawbar of the spindle to pull the toolholder firmly into the spindle and to release the toolholder automaticall666 HSK-toolholders DIN 69893 The hollow taper shank (HSK) has prevailed since its standardization as an interface between machine and tool HSK benef Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.31666 HSK-toolholders DIN 69893 The hollow taper shank (HSK) has prevailed since its standardization as an interface between machine and tool HSK benef668 Overview HSK (hollow taper shanks) DIN 69063-1 (ISO 12164-1) Form A Standard type for machining centres and milling machines HSK for automatic to Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.33668 Overview HSK (hollow taper shanks) DIN 69063-1 (ISO 12164-1) Form A Standard type for machining centres and milling machines HSK for automatic to669 HSK coolant tubes HSK form A, -B or -D holders must be equipped with a coolant tube Using holders without a coolant tube could cause unseen machi Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.34669 HSK coolant tubes HSK form A, -B or -D holders must be equipped with a coolant tube Using holders without a coolant tube could cause unseen machi670 An imbalance produces a centrifugal force during the rotation of the spindle impeding the smooth running of the tool This imbalance influences th Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.35670 An imbalance produces a centrifugal force during the rotation of the spindle impeding the smooth running of the tool This imbalance influences th

---

---



Главная / Home | Каталоги / Catalogs | Словарь / Index | Популярное / Popular | Контакты / Contacts

Все использованные информационные материалы являются собственностью их Уважаемых Владельцев.
All copyrights remain by their owners.

updated 17.02.2017 at 04:44:55 for those 46 interested and for those 35 unique visitors who already was here 46 times. GGServer20170325 generate this page in 0,001 seconds.

Система "Промышленные каталоги" / Industrial catalogs
© 2002 - 2017 Лаборатория 2У / Lab2U
Стр. / Page Lab2U446364606