Лаборатория 2У    Lab2U

Каталоги / Catalogs

Словарь   Популярное


Металлообработка
на заказ
тел. 89210954455
instroykomplekt@mail.ru
Обновлено 2017-02-17 04:44:55 Просмотров 124
Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

KEMMLER | Каталог KEMMLER 2017 Инструмент для обработки на станках (Всего 720 стр.)


Overview HSK (hollow taper shanks) DIN 69063-1 (ISO 12164-1) Form A Standard type for machining centres and milling machines HSK for automatic to

668 Каталог KEMMLER 2017 Инструмент и приспособления для обработки на станках Стр.13.33

668 Overview HSK (hollow taper shanks) DIN 69063-1 (ISO 12164-1) Form A Standard type for machining centres and milling machines HSK for automatic to Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.33

Overview HSK (hollow taper shanks) DIN 69063-1 (ISO 12164-1) Form A Standard type for machining centres and milling machines HSK for automatic to

Overview HSK (hollow taper shanks) DIN 69063-1 (ISO 12164-1) Form A Standard type for machining centres and milling machines. HSK for automatic tool change with gripper groove and index notch. Manual operation is via access hole in taper. Form B relies on driving dogs on the joint face as shank isn't slotted. Torque is transmitted through highly accurate connnection. DIN 69063-2 (ISO 12164-1) Form B For machining centres, milling and turning machines. With enlarged flange size for rigid machining. For automatic tool change. Coolant supply through the flange. Drive keys at the flange. Hole for data carrier DIN STD 69873 at the flange. DIN 69063-1 (ISO 12164-1) Form C For transfer lines, special machines and modular tooling systems. HSK for manual tool change. Operation is via access hole in taper. Form D relies on driving dogs on the joint face as shank isn't slotted. Torque is transmitted through highly accurate connnection. DIN 69063-2 (ISO 12164-2) Form D For special machines. With enlarged flange size for rigid machining. For manual tool change. Coolant supply through the flange. Drive keys at the flange. DIN 69063-5 Form E For high-speed applications. For automatic tool change. HSK for automatic tool change. Torque is transmitted through highly accurate connnection. Version with access hole acc. to DIN 69893-1 by arrangement. DIN 69063-6 Form F For high-speed applications mainly in woodworking industries. HSK for automatic tool change. Torque is transmitted through highly accurate connnection. Version with access hole acc. to DIN 69893-1 by arrangement. "



KEMMLER | Каталог KEMMLER 2017 Инструмент для обработки на станках (Всего 720 стр.)

Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

665 The pull stud allows the locking drawbar of the spindle to pull the toolholder firmly into the spindle and to release the toolholder automaticall Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.30665 The pull stud allows the locking drawbar of the spindle to pull the toolholder firmly into the spindle and to release the toolholder automaticall666 HSK-toolholders DIN 69893 The hollow taper shank (HSK) has prevailed since its standardization as an interface between machine and tool HSK benef Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.31666 HSK-toolholders DIN 69893 The hollow taper shank (HSK) has prevailed since its standardization as an interface between machine and tool HSK benef667 Term definitions of HSK-A interface for automatic tooling systems o Gripper groove: circular groove Index notch: sickle-shaped notch across gripp Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.32667 Term definitions of HSK-A interface for automatic tooling systems o Gripper groove: circular groove Index notch: sickle-shaped notch across gripp669 HSK coolant tubes HSK form A, -B or -D holders must be equipped with a coolant tube Using holders without a coolant tube could cause unseen machi Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.34669 HSK coolant tubes HSK form A, -B or -D holders must be equipped with a coolant tube Using holders without a coolant tube could cause unseen machi670 An imbalance produces a centrifugal force during the rotation of the spindle impeding the smooth running of the tool This imbalance influences th Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.35670 An imbalance produces a centrifugal force during the rotation of the spindle impeding the smooth running of the tool This imbalance influences th671 In accordance with DIN ISO 1940 the balance grade is denoted with G as well as the units gmm/kg or jm respectively and is relative to the number Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.36671 In accordance with DIN ISO 1940 the balance grade is denoted with G as well as the units gmm/kg or jm respectively and is relative to the number

---

---



Главная / Home | Каталоги / Catalogs | Словарь / Index | Популярное / Popular | Контакты / Contacts

Все использованные информационные материалы являются собственностью их Уважаемых Владельцев.
All copyrights remain by their owners.

updated 17.02.2017 at 04:44:55 for those 124 interested and for those 94 unique visitors who already was here 124 times. GGServer20171106 generate this page in 0,014 seconds.

Система "Промышленные каталоги" / Industrial catalogs
© 2002 - 2017 Лаборатория 2У / Lab2U
Стр. / Page Lab2U1968240080