Лаборатория 2У    Lab2U

Каталоги / Catalogs

Словарь   Популярное


Металлообработка
на заказ
тел. 89210954455
instroykomplekt@mail.ru
Обновлено 2017-02-17 04:44:55 Просмотров 62
Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

KEMMLER | Каталог KEMMLER 2017 Инструмент для обработки на станках (Всего 720 стр.)


Operating and user instructions for CNC-drill chucks Use clamping and unclamping of tools To guarantee error-free function of the CNC-drill chuck

675 Каталог KEMMLER 2017 Инструмент и приспособления для обработки на станках Стр.13.40

675 Operating and user instructions for CNC-drill chucks Use clamping and unclamping of tools To guarantee error-free function of the CNC-drill chuck Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.40

Operating and user instructions for CNC-drill chucks Use clamping and unclamping of tools To guarantee error-free function of the CNC-drill chuck

Operating and user instructions for CNC-drill chucks Use clamping and unclamping of tools To guarantee error-free function of the CNC-drill chuck 08/ 13/ 16, please follow the next instructions. Attention: Clamping or releasing only at standstill of machine spindle or outside the machine. The CNC-drill chuck (pos. 1) is clamped by means of an Allen-T-wrench (pos. 3) on side of the drill chuck actuating a vevel gear. Turn the Allen-T-wrench counter clockwise to open the drill chuck, clockwise to close it. 1st step Open the jaw of the drill chuck wide enough to insert the cutting tool. (pos. 2) 2nd step Fit cutting tool (pos. 2) to the stud into the CNC-drill chuck (pos. 1) so that the tool shank is fit closely to the whole length of the clamping jaws. (picture 1) & K t o picture 1 3rd step Turn the Allen-T-wrench (pos. 3) clockwise to clamp the cutting tool using a torque of 15 Nm (10 Nm for 0,5-8) to clamp the tool properly. (picture 2) Note: Do not use any kind of extensions for clamping. By using a torque higher than mentioned the bevel gear can be damaged. In this case the bevel pinion will be the rated break point to protect the drill chuck against damage. 4th step Test the concentricity after clamping and meke sure that the tool is clamped safely. Note: Do not clamp tools with tapered shafts. 5th step The CNC-drill chuck is ready for work and can be clamped into the machine spindle. (picture 3) picture 2 6th step To release the cutting tool please turn the Allen-T-wrench counter clockwise and remove the cutting tool. (picture 3) Maintenance and Cleaning The CNC-drill chucks 08/13/16 are maintenance-free. The CNC-drill chucks 08/13/16 should be cleaned after use with a clean cloth to prevent corrosions. Before storing the drill chucks please spray oil on the survace to prevent corrosion. Repair In case of a damage of the CNC-drill chuck, please send it back tu us. We will principally exchange the complete drill chuck head. With this procedure you will get the quickest possible a replacement and only on this way a proper function and a run-out accuracy of < 0.03 mm can be guaranteed. picture 3 KEMMLER 13.40



KEMMLER | Каталог KEMMLER 2017 Инструмент для обработки на станках (Всего 720 стр.)

Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

672 Modern machining processes place heavy demands on tool holding Hydraulic expansion chucks provide excellent clamping characteristics combined wit Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.37672 Modern machining processes place heavy demands on tool holding Hydraulic expansion chucks provide excellent clamping characteristics combined wit673 Operating and user instructions for hydraulic expansion chucks To ensure a flawless function of the hydraulic expansion chucks, please observe th Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.38673 Operating and user instructions for hydraulic expansion chucks To ensure a flawless function of the hydraulic expansion chucks, please observe th674 Bore Screw Torque 0 6 mm M 6 SW 3 10 Nm 0 8 mm M 8 SW 4 10 Nm 0 10 mm M 10 SW 5 16 Nm 0 12 mm M 12 SW 6 28 Nm 0 14 mm M 12 SW 6 28 Nm 0 16 mm M 1 Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.39674 676 Mounting instructions for ER-Collets per DIN STD 6499 Assembling instructions: Insert groove of collet into eccentric ring of the clamping nut at Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.41676 Mounting instructions for ER-Collets per DIN STD 6499 Assembling instructions: Insert groove of collet into eccentric ring of the clamping nut at677 Mounting instruction for sealing discs Assembly Insert the small diameter of the disc into the centre of the coolant nut and apply even pressure Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.42677 Mounting instruction for sealing discs Assembly Insert the small diameter of the disc into the centre of the coolant nut and apply even pressure678 Quick-change tapping chucks The process of tapping is a complex balance of rotational and axial movements of the tool It is sometimes necessary t Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.43678 Quick-change tapping chucks The process of tapping is a complex balance of rotational and axial movements of the tool It is sometimes necessary t

---

---



Главная / Home | Каталоги / Catalogs | Словарь / Index | Популярное / Popular | Контакты / Contacts

Все использованные информационные материалы являются собственностью их Уважаемых Владельцев.
All copyrights remain by their owners.

updated 17.02.2017 at 04:44:55 for those 62 interested and for those 47 unique visitors who already was here 62 times. GGServer20170325 generate this page in 0,001 seconds.

Система "Промышленные каталоги" / Industrial catalogs
© 2002 - 2017 Лаборатория 2У / Lab2U
Стр. / Page Lab2U3646635528