220 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A216

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A216 0220 ENG Lab2u

Walter CaptoTM ISO 26623 k 45° negative toolholder range external machining rigid clamping system Tool o f l4 Dmin2 f l4 Dmin2 Designation 1 dl in mm Y As Type C4-DSDNN-00050-12 12 C4 0.012 1.969 5.512 0.3 50 140 -6° -6° SN 43 SN .1204.. C5-DSDNN-00060-12 12 C5 0.012 2.362 6.496 0.3 60 165 -6° -6° C6-DSDNN-00065-12 12 C6 0.012 2.559 7.480 0.3 65 190 -6° -6° C6-DSDNN-00070-19 19 C6 0.020 2.756 7.677 0.5 70 195 -6° -6° SN .54.. SN .1506. C8-DSDNN-00080-25 25 C8 0.039 3.150 9.843 1 80 250 -6° -6° SN 85 SN .2507.. Measured with master insert SN 432 (120408) / SN 543 (190612) / SN 856 (250724). Bodies and assembly parts are included in the scope of delivery. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. For information on Dmin and Dmin2, see page A 453. Assembly parts a Type SN .43. SN 1204 SN 54 SN 1506 SN 85 SN 2507 Shim AP308-SN12 AP310-SN19 AP351-SN25 Screw for shim FS1461 (Torx 15IP) FS1463 (Torx 20IP) FS1589 (Torx T25IP) Clamp PK241 PK243 PK301 Screw for clamp Tightening torque FS1473 (Torx 15IP) 35 in-lb (3.9 Nm) FS1474 (Torx 20IP) 57 in-lb (6.4 Nm) FS1591 (Torx T25IP) 84 in-lb (9.5 Nm) Pressure spring FS1470 FS1471 FS1471 Pin RS117 RS117 RS117 Torx key FS1465 (Torx 15IP/SW 3.5) FS1464 (Torx 20IP) FS1592 (Torx T25IP) Cooling lubricant nozzle C4 FS1477 Cooling lubricant nozzle C5 FS1475 Cooling lubricant nozzle C6 FS1475 FS1475 Cooling lubricant nozzle C8 FS1475 Accessories SN .43. SN 54 SN 85 Type SN 1204 SN 1506 SN 2507 'fTN. Clamp set PK241-SET PK243-SET PK301-SET (standard mounting parts) Clamp set with PK245-SET tzi carbide clamping plate AP351-SN2509 u Shim SN ..2509 A 216