500 Каталог MAHR 2007 Линейно-угловые средства измерений Измерительный инструмент Стр.19-24

Каталог MAHR 2007 Линейно-угловые средства измерений Стр. 19-24 0500 ENG Lab2u

MarVision. Industry Solutions Measurement of hobs (ACCURE 250 only) Comprehensive hob measurement for standard and special profiles Maximum tool weights up to 15 kg (33 lbs) Diameters up to 200 mm (7.87 in) Lead angle 15 Free contour scanning up to a meas. point density of 1 m (40 in) Measurements conforming to DIN 3968 profile form (O) pitch (O) base pitch (O) radial runout of head (O) radial runout of proof diameter (O) flute direction (O T); form and position of cutting faces (O T) flute pitch (T) axial runout of proof shoulder (T). (O - optical probing T - touch probing) Measurement of taps (ACCURE 250 only) Comprehensive measurement of right-hand and left-hand cutting taps Diameters from 1.4 mm to 70 mm (0.055 in to 2.76 in) Lead angle 15 Free contour scanning up to a meas. point density of 1 m (40 in) Axial section profile including starting taper calculation of outer and core diameters half-angle of thread lead taper and other dimensions are measured in transmitted light Rake angle flute pitch and web diameter are measured in incident light Measurement of ball-track milling cutters (UNI-VIS 250 TAURUS) Comprehensive measurement of ball-track milling cutters in axial and axis-parallel sections Automatic tool wobble correction Free contour scanning up to a meas. point density of 1 m (40 in) Diameters up to 150 mm (5.91 in) Import of CAD data for programming the measuring machine Optical measurements of profile forms lengths angles radii rake angles relief angles and radial run-out Measurement of ball-end milling cutters (UNI-VIS 250 TAURUS) Comprehensive axial-section measurement of ball-end milling cutters Analysis in freely selectable angular divisions of the nominal or actual circle Automatic tool wobble correction Free contour scanning up to a meas. point density of 1 m (40 in) Optical measurements of profile forms position errors relative to the nominal profile position errors relative to the shank radial run-out rake angles and relief angles