443 Каталог MAHR 2007 Линейно-угловые средства измерений Измерительный инструмент Стр.16-27

Каталог MAHR 2007 Линейно-угловые средства измерений Стр. 16-27 0443 ENG Lab2u

MarSurf. Surface Measuring Instruments and Systems PGN Geometric Standard DIN EN ISO 5436 type C1 sinusoidal groove profile Surface standard with sinusoidal groove profile for dynamic monitoring of the roughness measuring station. Ra Rz Rmax. Optical flat. The following versions are available PGN 1 Profile depth approx. 1.5 m (60 in) groove distance approx. 0.10 mm (0.0039 in) PGN 3 Profile depth approx. 3 m (120 in) groove distance approx. 0.12 mm (0.0047 in) PGN 10 Profile depth approx. 10 m (394 in) groove distance approx. 0.20 mm (0.0079 in) DKD (German Calibration Service) and Mahr Calibration Certificates on request. PEN 10-1 Setting Standard DIN EN ISO 5436 type A1 depth setting standard Depth setting standard for static calibration of the vertical stroke for all non-skidded probes single-skid probes and dual-skid probes. Measuring groove depth approx. 10 m (394 in) diameter 44 mm (1.73 in). 2 calibration grooves Optical flat DKD and Mahr calibration certificates on request. PRN 10 Geometric Standard Turned roughness profile Including Mahr calibration certificate. Surface standard with turned profile chrome-plated profile depth approx. 10 m (394 in) for monitoring the roughness measuring station. Ra Rz Rmax. KN 100 Contour Standard Standard for monitoring contour measurement systems The KN 100 contour standard was developed in cooperation with the PTB the German national metrology institute. It is the first standard to allow confirmation and acceptance tests to be performed so that they are traceable to realistic geometries through concrete references. It conforms to the requirements of VDI VDE Guideline 2629.