Лаборатория   |   Каталоги / Catalogs  |   Словарь / Index  |   Популярное

Обновлено 2018-11-17 06:55:40

Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

KEMMLER | Каталог KEMMLER 2017 Инструмент для обработки на станках (Всего 720 стр.)

HSK coolant tubes HSK form A, -B or -D holders must be equipped with a coolant tube Using holders without a coolant tube could cause unseen machi

669 Каталог KEMMLER 2017 Инструмент и приспособления для обработки на станках Стр.13.34

669 HSK coolant tubes HSK form A, -B or -D holders must be equipped with a coolant tube Using holders without a coolant tube could cause unseen machi Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.34

HSK coolant tubes HSK form A, -B or -D holders must be equipped with a coolant tube Using holders without a coolant tube could cause unseen machi

HSK coolant tubes HSK form A, -B or -D holders must be equipped with a coolant tube. Using holders without a coolant tube could cause unseen machine spindle damage. DIN 69893 Form C, -E and -F do not require a coolant tube. Through coolant and sealing functions are provided by the locking unit. The coolant tube is ideally mounted in vertical direction - from the bottom to the top. In this manner the sealing ring is prevented from being compressed during location which would cause the loss of its sealing function. After mounting, the coolant pipe can be moved only to a minimum degree according to DIN (± 1°). Installation 1. The HSK holder must be clean, free of swarf and undamaged. 2. Grease the O-rings prior to assembly. 3. Centraly insert the complete coolant tube (coolant pipe, union nut and 2 O-rings) in the HSK with the assistance of the socket spanner. 4. Screw in the coolant tube and tighten (see table for torque figures) 5. Check coolant pipe for radial mobility. Torque figures for HSK Mt (Nm) 32 7 40 11 50 15 63 20 80 25 100 30 KEMMLER 13.34 13




См.также / See also :

KEMMLER

Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ
Каталог
KEMMLER
2017
Инструмент
для
обработки
на станках
(ENG DEU FRA)
(720 страниц)

Режущий инструмент, инструментальная оснастка и приспособления / Cutting tools, tooling system and workholding




Каталог KEMMLER 2017 Инструмент для обработки на станках (Всего 720 стр.)

666 HSK-toolholders DIN 69893 The hollow taper shank (HSK) has prevailed since its standardization as an interface between machine and tool HSK benef Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.31666 HSK-toolholders DIN 69893 The hollow taper shank (HSK) has prevailed since its standardization as an interface between machine and tool HSK benef667 Term definitions of HSK-A interface for automatic tooling systems o Gripper groove: circular groove Index notch: sickle-shaped notch across gripp Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.32667 Term definitions of HSK-A interface for automatic tooling systems o Gripper groove: circular groove Index notch: sickle-shaped notch across gripp668 Overview HSK (hollow taper shanks) DIN 69063-1 (ISO 12164-1) Form A Standard type for machining centres and milling machines HSK for automatic to Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.33668 Overview HSK (hollow taper shanks) DIN 69063-1 (ISO 12164-1) Form A Standard type for machining centres and milling machines HSK for automatic to670 An imbalance produces a centrifugal force during the rotation of the spindle impeding the smooth running of the tool This imbalance influences th Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.35670 An imbalance produces a centrifugal force during the rotation of the spindle impeding the smooth running of the tool This imbalance influences th671 In accordance with DIN ISO 1940 the balance grade is denoted with G as well as the units gmm/kg or jm respectively and is relative to the number Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.36671 In accordance with DIN ISO 1940 the balance grade is denoted with G as well as the units gmm/kg or jm respectively and is relative to the number672 Modern machining processes place heavy demands on tool holding Hydraulic expansion chucks provide excellent clamping characteristics combined wit Каталог KEMMLER 2017 Инструмент и приспособления для металлообработки на универсальных промышленных металлорежущих станках и комплексах с ЧПУ Стр. 13.37672 Modern machining processes place heavy demands on tool holding Hydraulic expansion chucks provide excellent clamping characteristics combined wit

---

---








Главная   |   Каталоги  |   Словарь  |   Популярное  |   Разработчики сайта



Поиск на сайте Lab2u.ru с помощью поисковых систем GOOGLE, ЯНДЕКС, BING :


Все использованные информационные материалы являются собственностью их Уважаемых Владельцев. / All copyrights remain by their owners.

© 2002 - 2019 Лаборатория 2У / Lab2U  |  Система "Промышленные каталоги" / Industrial catalogs  |  Стр. / Page Lab2U4014916911